[Dhis2-devs] Value not showing in Data Visualizer

Support - Assistance technique
1

Hi All

Forwarding this issue reported by Gitika from HISP India Delhi Office :-

*I am using 2.20 snapshot and have created one data element ‘Population’ with aggregation operator as ‘Average (sum in orgunit hierarchy)’ which is used for annual data entry.
Similarly have created an indicator using this data element as denominator and Is annualised set to ‘Yes’.

···

While using this data element or indicator in data visualiser for analysis, the monthly values are not shown, whereas the annual values are shown.

Would like to know if some other users are facing this issue? It was working fine in the earlier version 2.17.

Every Help is Appreciated.

Regards

harsh

2

Hi all,

Am still using 2.16 but facing the same problem, please help.

···

From: Dhis2-users [mailto:dhis2-users-bounces+bridgetmagoba=mifumi.org@lists.launchpad.net] On Behalf Of Harsh Atal
Sent: Wednesday, June 10, 2015 5:35 AM
To: dhis2-devs; DHIS 2 Users list
Subject: [Dhis2-users] [Dhis2-devs] Value not showing in Data Visualizer

Hi All

Forwarding this issue reported by Gitika from HISP India Delhi Office :-

  • I am using 2.20 snapshot and have created one data element ‘Population’ with aggregation operator as ‘Average (sum in orgunit hierarchy)’ which is used for annual data entry.
    Similarly have created an indicator using this data element as denominator and Is annualised set to ‘Yes’.*

While using this data element or indicator in data visualiser for analysis, the monthly values are not shown, whereas the annual values are shown.

Would like to know if some other users are facing this issue? It was working fine in the earlier version 2.17.

Every Help is Appreciated.

Regards

harsh


Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com

3

A gentle reminder please.

···

On Thu, Jun 11, 2015 at 4:11 AM, Bridget Magoba bridgetmagoba@mifumi.org wrote:

Hi all,

Am still using 2.16 but facing the same problem, please help.

From: Dhis2-users [mailto:dhis2-users-bounces+bridgetmagoba=mifumi.org@lists.launchpad.net] On Behalf Of Harsh Atal
Sent: Wednesday, June 10, 2015 5:35 AM
To: dhis2-devs; DHIS 2 Users list
Subject: [Dhis2-users] [Dhis2-devs] Value not showing in Data Visualizer

Hi All

Forwarding this issue reported by Gitika from HISP India Delhi Office :-

  • I am using 2.20 snapshot and have created one data element ‘Population’ with aggregation operator as ‘Average (sum in orgunit hierarchy)’ which is used for annual data entry.
    Similarly have created an indicator using this data element as denominator and Is annualised set to ‘Yes’.*

While using this data element or indicator in data visualiser for analysis, the monthly values are not shown, whereas the annual values are shown.

Would like to know if some other users are facing this issue? It was working fine in the earlier version 2.17.

Every Help is Appreciated.

Regards

harsh


Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com

Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

–

Thanks & Regards
Dr. Gitika Arora
Senior HIS Officer
HISP India

4

Hi All, Can you please tell us if we are making any mistake while defining indicators or is it a bug? Thanks in advance.

···

On Wed, Jun 10, 2015 at 6:05 PM, Harsh Atal harsh.atal@gmail.com wrote:

Hi All

Forwarding this issue reported by Gitika from HISP India Delhi Office :-

*I am using 2.20 snapshot and have created one data element ‘Population’ with aggregation operator as ‘Average (sum in orgunit hierarchy)’ which is used for annual data entry.
Similarly have created an indicator using this data element as denominator and Is annualised set to ‘Yes’.
*

While using this data element or indicator in data visualiser for analysis, the monthly values are not shown, whereas the annual values are shown.

Would like to know if some other users are facing this issue? It was working fine in the earlier version 2.17.

Every Help is Appreciated.

Regards

harsh

Mailing list: https://launchpad.net/~dhis2-devs

Post to : dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs

More help : https://help.launchpad.net/ListHelp

–

Regards,
Bharath Kumar. Ch

5

Hi Harsh,

Your approach to annualised monthly indicator values seem correct, but hard to say why it doesn’t work without seeing the whole indicator.

Can you paste in the full indicator formula, incl. information about your numerator, is it collected monthly?

I’ve been using indicators of that type without any problems in the latest 2.19 release (and earlier versions), so doubt there is a bug there.

There are many examples of such indicators on the demo, e.g. ANC 1 coverage:

https://apps.dhis2.org/demo/dhis-web-maintenance-datadictionary/showUpdateIndicatorForm.action?id=52486

Denominator data element:

https://apps.dhis2.org/demo/dhis-web-maintenance-datadictionary/showUpdateDataElementForm.action?id=20899&update=true

Numerator data element:

https://apps.dhis2.org/demo/dhis-web-maintenance-datadictionary/showUpdateDataElementForm.action?id=359596&update=true

Ola

···

On Wed, Jun 10, 2015 at 6:05 PM, Harsh Atal harsh.atal@gmail.com wrote:

Hi All

Forwarding this issue reported by Gitika from HISP India Delhi Office :-

*I am using 2.20 snapshot and have created one data element ‘Population’ with aggregation operator as ‘Average (sum in orgunit hierarchy)’ which is used for annual data entry.
Similarly have created an indicator using this data element as denominator and Is annualised set to ‘Yes’.
*

While using this data element or indicator in data visualiser for analysis, the monthly values are not shown, whereas the annual values are shown.

Would like to know if some other users are facing this issue? It was working fine in the earlier version 2.17.

Every Help is Appreciated.

Regards

harsh

Mailing list: https://launchpad.net/~dhis2-devs

Post to : dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs

More help : https://help.launchpad.net/ListHelp

–

Regards,
Bharath Kumar. Ch

6

I see you mention 2.20 snapshot. Please try on https://apps.dhis2.org/dev and see there. You can replace “demo” with “dev” in my example URLs below.

Ola

···

On Wed, Jun 10, 2015 at 6:05 PM, Harsh Atal harsh.atal@gmail.com wrote:

Hi All

Forwarding this issue reported by Gitika from HISP India Delhi Office :-

*I am using 2.20 snapshot and have created one data element ‘Population’ with aggregation operator as ‘Average (sum in orgunit hierarchy)’ which is used for annual data entry.
Similarly have created an indicator using this data element as denominator and Is annualised set to ‘Yes’.
*

While using this data element or indicator in data visualiser for analysis, the monthly values are not shown, whereas the annual values are shown.

Would like to know if some other users are facing this issue? It was working fine in the earlier version 2.17.

Every Help is Appreciated.

Regards

harsh

Mailing list: https://launchpad.net/~dhis2-devs

Post to : dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs

More help : https://help.launchpad.net/ListHelp

–

Regards,
Bharath Kumar. Ch

7

Hi Ola, thanks for the clarification, we checked in demo it is working as expected. We will cross check in our application. Thanks

···

On Fri, Jun 12, 2015 at 1:05 PM, Ola Hodne Titlestad olati@ifi.uio.no wrote:

I see you mention 2.20 snapshot. Please try on https://apps.dhis2.org/dev and see there. You can replace “demo” with “dev” in my example URLs below.

Ola

On Fri, 12 Jun 2015 at 09:32 Ola Hodne Titlestad olati@ifi.uio.no wrote:

Hi Harsh,

Your approach to annualised monthly indicator values seem correct, but hard to say why it doesn’t work without seeing the whole indicator.

Can you paste in the full indicator formula, incl. information about your numerator, is it collected monthly?

I’ve been using indicators of that type without any problems in the latest 2.19 release (and earlier versions), so doubt there is a bug there.

There are many examples of such indicators on the demo, e.g. ANC 1 coverage:

https://apps.dhis2.org/demo/dhis-web-maintenance-datadictionary/showUpdateIndicatorForm.action?id=52486

Denominator data element:

https://apps.dhis2.org/demo/dhis-web-maintenance-datadictionary/showUpdateDataElementForm.action?id=20899&update=true

Numerator data element:

https://apps.dhis2.org/demo/dhis-web-maintenance-datadictionary/showUpdateDataElementForm.action?id=359596&update=true

Ola

On Fri, 12 Jun 2015 at 09:23 Bharath chbharathk@gmail.com wrote:

Hi All, Can you please tell us if we are making any mistake while defining indicators or is it a bug? Thanks in advance.

Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

–

On Wed, Jun 10, 2015 at 6:05 PM, Harsh Atal harsh.atal@gmail.com wrote:

Hi All

Forwarding this issue reported by Gitika from HISP India Delhi Office :-

*I am using 2.20 snapshot and have created one data element ‘Population’ with aggregation operator as ‘Average (sum in orgunit hierarchy)’ which is used for annual data entry.
Similarly have created an indicator using this data element as denominator and Is annualised set to ‘Yes’.
*

While using this data element or indicator in data visualiser for analysis, the monthly values are not shown, whereas the annual values are shown.

Would like to know if some other users are facing this issue? It was working fine in the earlier version 2.17.

Every Help is Appreciated.

Regards

harsh

Mailing list: https://launchpad.net/~dhis2-devs

Post to : dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs

More help : https://help.launchpad.net/ListHelp

–

Regards,
Bharath Kumar. Ch

Regards,
Bharath Kumar. Ch