stephocay
(Stephen Ocaya)
8 November 2017 12:45
1
Dear All,
We did an upgrade of the DHIS2 from 2.25 to 2.26 and now 2.27 but it seems the SMS capability to get incoming SMS reports is failing.
Refer to the attached and provide guidance on how to fix the issue.
···
You can do anything, but not everything.
Dear Ocaya,
Use the sms/inbound endpoint. You will need the message and originator parameters.
https://docs.dhis2.org/master/en/developer/html/dhis2_developer_manual_full.html#d11178e11888
If you are using the sms.war file?
I did a modification for 2.27 support. You can get it from here https://github.com/talexie/dhis-sms-in
If you are using kannel as a SMS gateway, just use the api end point. It will just work with any SMS Command you set. This is preferred if you are using SMPP protocol on the telecom end.
Alex
···
On Wed, Nov 8, 2017 at 3:45 PM, Ocaya Stephen stephocay@gmail.com wrote:
Dear All,
We did an upgrade of the DHIS2 from 2.25 to 2.26 and now 2.27 but it seems the SMS capability to get incoming SMS reports is failing.
–
You can do anything, but not everything.
Refer to the attached and provide guidance on how to fix the issue.
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
–
Alex Tumwesigye
Technical Advisor - DHIS2 (Consultant),
Ministry of Health/AFENET | HISP Uganda
Kampala
Uganda
+256 774149 775, + 256 759 800161
Skype ID: talexie
IT Consultant (Servers, Networks and Security, Health Information Systems - DHIS2, Disease Outbreak & Surveillance Systems) & Solar Consultant
"I don’t want to be anything other than what I have been - one tree hill "
stephocay
(Stephen Ocaya)
8 November 2017 16:17
3
Dear Alex,
We noted that the mTrac server was still using the old endpoint of /sms/smsinput.action.
The sms/inbound endpoint worked well when tested. It will ve updated accordingly …
Regards.
···
On Nov 8, 2017 17:41, “Alex Tumwesigye” atumwesigye@gmail.com wrote:
Dear Ocaya,
Use the sms/inbound endpoint. You will need the message and originator parameters.
https://docs.dhis2.org/master/en/developer/html/dhis2_developer_manual_full.html#d11178e11888
If you are using the sms.war file?
I did a modification for 2.27 support. You can get it from here https://github.com/talexie/dhis-sms-in
If you are using kannel as a SMS gateway, just use the api end point. It will just work with any SMS Command you set. This is preferred if you are using SMPP protocol on the telecom end.
Alex
On Wed, Nov 8, 2017 at 3:45 PM, Ocaya Stephen stephocay@gmail.com wrote:
Dear All,
We did an upgrade of the DHIS2 from 2.25 to 2.26 and now 2.27 but it seems the SMS capability to get incoming SMS reports is failing.
–
You can do anything, but not everything.
Refer to the attached and provide guidance on how to fix the issue.
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
–
Alex Tumwesigye
Technical Advisor - DHIS2 (Consultant),
Ministry of Health/AFENET | HISP Uganda
Kampala
Uganda
+256 774149 775, + 256 759 800161
Skype ID: talexie
IT Consultant (Servers, Networks and Security, Health Information Systems - DHIS2, Disease Outbreak & Surveillance Systems) & Solar Consultant
"I don’t want to be anything other than what I have been - one tree hill "