With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Anyone to assist here?
···
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Hi Stanley,
not seeing yout TEI’s could be caused by the “Display front page list” parameter not being marked.
It is in the program details step when you create or edit your program.
Cheers,
Marta
···
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Hi Marta,
Actually when i select an OU i am able to see the TEI’s but to display all TEI’s across all OU’s like we used to in versions 2.28 below where we could select ‘List All’ and all TEI’s could be displayed,i dont see it in 2.29.
Any ideas
···
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Hey Stanley,
You are right - the “List all” button is no longer there in the reworked UI of 2.29. We are actively working on making the Tracker data more secure, and the use case for the list all function was perhaps not understood properly by us when we designed 2.29. Can you let us know a bit about your use case? Will the end user click the button to list all TEIs in the entire system and start paging through the list?
Best regards,
Markus
···
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Hey Markus,
This makes alot of sense though.
However,my issue is when i want to download the entire list of TEI’s into an excel or CV for other analysis outside DHIS2,i can not do so.Initially i would simply List All and download the list of TEI’s.
If there is a way i can do that,then thats fine.
Thank you
Stanley
···
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Hey Stanley,
thanks for the feedback.
You can go directly to the API and get the CSV:
-
ou would be the UID of your top/root organization unit.
-
program would be the uid of the program you want to download TEIs for.
You can perhaps create a “external resource” and put this link on a dashboard for use of your end users.
Let me know if this helps 
Markus
···
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Hi Markus,
I have tried wgoing directly to the API but i keep getting this error
What could be the problem.I am using version 2.29
HTTP Status 404 - /2.29/api/29/trackedEntityInstances/query.csv
···
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Hey again!
Can you send me the full link you are trying, and also the link to the login page of your dhis instance?
Markus
···
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Hi
Is your war file named 2.29? if not the start of that path is wrong (we have 2.29 2.28 etc on your play server to be able to have multiple instances…)
···
–
Morten Olav Hansen
Senior Engineer, DHIS 2
Team Integration Lead
University of Oslo
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Dear Morten,
Yes it is 2.29.
···
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
I mean the name of your actual .war file, not the version of DHIS2… since you are getting a 404, it means you are pointing to an invalid URL, and that error is coming from tomcat and not dhis2… which means you are probably not pointing to the right path on your tomcat server.
···
–
Morten Olav Hansen
Senior Engineer, DHIS 2
Team Integration Lead
University of Oslo
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Stanley, try this URL:
https://fhi360mal.baosystems.com/api/trackedEntityInstances/query.csv
···
–
Morten Olav Hansen
Senior Engineer, DHIS 2
Team Integration Lead
University of Oslo
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Hi Markus,
I think what Stanley is trying to express here, applies to all about good features that our end-users are familiar with, and which get disappeared from version to versions. In the older versions, an end-user at higher Orgunit might list all TEI recorded simply by selecting specific OU. From this list he/she can immediately opt to list all, active enrollment, completed , etc depending on what is needed for further analysis without passing through Event reports app.
We have received the same complaints from program using Tracker based systems. Because this way of listing TEI is quick and i would advocate if you can explore the possibility of activating again.
On the other hand, i need to hear from the community regarding DHIS 2.29 if the Event report app is generating tables with cases based data captured after upgrading. My tracker system is misbehaving after upgrading to 2.29, the Event reports app is no aggregating cases reported after upgrade while the scheduled analytics seems to run correctly . Has it reported or someone has hint?
Regards,
···
Adolphe Kamugunga
MIS Technical Advisor
Mobile: +250 788 740 578
Email:kaadol@gmail.com
Skype: ka.adolphe
RWANDA
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
The feature that my friends on this email thread try to explain I believe is very useful. It obvious that a lot of end-users on different tracker projects that I know were benefiting a lot with the named feature for generating some kind of Line Listing report (profile) with selected attributes by all the organization units which are under their responsibility (User organisation unit).
Thanks Markus for the API, it works fine for me. Though, in a quick glance it couldn’t show the attributes with data type “Date”. Probably is because I am using data format ISO 8601 03-31-1981 (dd-MM-yyyy). However, the shared API has been useful, at least I managed to cool down the anger of my clients
Regards to the security concern: I am 100% agreed. However, I think we should trade-off because now the Tracker has various use-cases in every sector, it is no longer in health sector alone. Even in a Health sometimes one would like to generate the line listing of the patients / clients enrolled on their Districts (with other attributes, not necessary with names). I think we should have the option not necessary there, then during the customization one can activate it if want to use
If we think for a security reasons it is not safe having that functionality at Tracker Data entry (which I support), then we should implement the same functionality on Even Report. But we may need to improve it by giving an option of giving line listing based on Attributes only (without interfere the events on given period). The big limitation with event report is just giving the all events on the row in a given period of time. If one person has 10 transactions (events) in given period of time, it will appear 10 times on the event rows. Furthermore the person if is not assigned into any Program stage will not show up on events, which are not required if one generate the Profile report.
I think all these are things which need to be considered. May be we should request these on JIRA!!
Best regards
Sele
Hi Markus,
I think what Stanley is trying to express here, applies to all about good features that our end-users are familiar with, and which get disappeared from version to versions. In the older versions, an end-user at higher Orgunit might list all TEI recorded simply by selecting specific OU. From this list he/she can immediately opt to list all, active enrollment, completed , etc depending on what is needed for further analysis without passing through Event reports app.
We have received the same complaints from program using Tracker based systems. Because this way of listing TEI is quick and i would advocate if you can explore the possibility of activating again.
On the other hand, i need to hear from the community regarding DHIS 2.29 if the Event report app is generating tables with cases based data captured after upgrading. My tracker system is misbehaving after upgrading to 2.29, the Event reports app is no aggregating cases reported after upgrade while the scheduled analytics seems to run correctly . Has it reported or someone has hint?
Regards,
Adolphe Kamugunga
MIS Technical Advisor
Mobile: +250 788 740 578
Email:kaadol@gmail.com
Skype: ka.adolphe
RWANDA
···
On Wednesday, August 22, 2018, 2:41:29 PM GMT+3, Kamugunga Adolphe kaadol@gmail.com wrote:
On Wed, 22 Aug 2018 at 12:29, Markus Bekken markus.bekken@gmail.com wrote:
Hey again!
Can you send me the full link you are trying, and also the link to the login page of your dhis instance?
Markus
- aug. 2018 kl. 08:57 skrev Stanley Kalyati skalyati@gmail.com:
Hi Markus,
I have tried wgoing directly to the API but i keep getting this error
What could be the problem.I am using version 2.29
HTTP Status 404 - /2.29/api/29/trackedEntityInstances/query.csv
On Thu, Jul 5, 2018 at 9:32 AM Markus Bekken markus@dhis2.org wrote:
Hey Stanley,
thanks for the feedback.
You can go directly to the API and get the CSV:
- ou would be the UID of your top/root organization unit.
- program would be the uid of the program you want to download TEIs for.
You can perhaps create a “external resource” and put this link on a dashboard for use of your end users.
Let me know if this helps
Markus
- jul. 2018 kl. 10:18 skrev Stanley Kalyati skalyati@gmail.com:
Hey Markus,
This makes alot of sense though.
However,my issue is when i want to download the entire list of TEI’s into an excel or CV for other analysis outside DHIS2,i can not do so.Initially i would simply List All and download the list of TEI’s.
If there is a way i can do that,then thats fine.
Thank you
Stanley
On Thu, Jul 5, 2018 at 9:06 AM Markus Bekken markus@dhis2.org wrote:
Hey Stanley,
You are right - the “List all” button is no longer there in the reworked UI of 2.29. We are actively working on making the Tracker data more secure, and the use case for the list all function was perhaps not understood properly by us when we designed 2.29. Can you let us know a bit about your use case? Will the end user click the button to list all TEIs in the entire system and start paging through the list?
Best regards,
Markus
- jul. 2018 kl. 17:25 skrev Stanley Kalyati skalyati@gmail.com:
Hi Marta,
Actually when i select an OU i am able to see the TEI’s but to display all TEI’s across all OU’s like we used to in versions 2.28 below where we could select ‘List All’ and all TEI’s could be displayed,i dont see it in 2.29.
Any ideas
On Wed, Jul 4, 2018 at 4:18 PM Marta Vila martavila@gmail.com wrote:
Hi Stanley,
not seeing yout TEI’s could be caused by the “Display front page list” parameter not being marked.
It is in the program details step when you create or edit your program.
Cheers,
Marta
On 4 July 2018 at 16:11, Stanley Kalyati skalyati@gmail.com wrote:
Anyone to assist here?
On Fri, Jun 29, 2018 at 11:56 AM Stanley Kalyati skalyati@gmail.com wrote:
With other versions of DHIS2,i would simply click on List All and all TEI regardless of OU registered from,they would all appear and i would download and review i may.
How can i do this in 2.29?
Thanks
Stanley
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp