We have been creating a number of new charts in DV module. In the main they work perfectly, however with certain charts, the parameters are not saved. For example I can build a chart which displays fine. I then save that same chart into my favourites, but if I re-load the chart, I get the error 'No Periods Selected'.
I have been trying to identify the issue, but have been unable to associate it with a specific DE / Indicator, a particular chart or a particular representation (swapping around Series / Category / Filter). I think the issue arises only when selecting the relative period 'Last month'. For example I created a chart showing district positivity rate for the last 12 months. I can save and reload this chart without any problems. However if I change the relative period to last month, while the chart can be saved, it gives the error 'No Periods Selected' when one tries to reload it. I obviously can't test this on the online dhis2.org demo as the Sierra Leone data doesn't extend to last month, but I have tried it on a test instance where I have input some fake data and then visualised the data for 'Last Month', but as with our production server I can't reload the saved version. Any one have any idea why?
Hope all of that made sense. Am happy to provide screenshots / screencast to clarify if not.... Fingers crossed there is an easy solution to this!
We have been creating a number of new charts in DV module. In the main they work perfectly, however with certain charts, the parameters are not saved. For example I can build a chart which displays fine. I then save that same chart into my favourites, but if I re-load the chart, I get the error ‘No Periods Selected’.
I have been trying to identify the issue, but have been unable to associate it with a specific DE / Indicator, a particular chart or a particular representation (swapping around Series / Category / Filter). I think the issue arises only when selecting the relative period ‘Last month’. For example I created a chart showing district positivity rate for the last 12 months. I can save and reload this chart without any problems. However if I change the relative period to last month, while the chart can be saved, it gives the error ‘No Periods Selected’ when one tries to reload it. I obviously can’t test this on the online dhis2.org demo as the Sierra Leone data doesn’t extend to last month, but I have tried it on a test instance where I have input some fake data and then visualised the data for ‘Last Month’, but as with our production server I can’t reload the saved version. Any one have any idea why?
Hope all of that made sense. Am happy to provide screenshots / screencast to clarify if not… Fingers crossed there is an easy solution to this!
We have been creating a number of new charts in DV module. In the main they work perfectly, however with certain charts, the parameters are not saved. For example I can build a chart which displays fine. I then save that same chart into my favourites, but if I re-load the chart, I get the error ‘No Periods Selected’.
I have been trying to identify the issue, but have been unable to associate it with a specific DE / Indicator, a particular chart or a particular representation (swapping around Series / Category / Filter). I think the issue arises only when selecting the relative period ‘Last month’. For example I created a chart showing district positivity rate for the last 12 months. I can save and reload this chart without any problems. However if I change the relative period to last month, while the chart can be saved, it gives the error ‘No Periods Selected’ when one tries to reload it. I obviously can’t test this on the online dhis2.org demo as the Sierra Leone data doesn’t extend to last month, but I have tried it on a test instance where I have input some fake data and then visualised the data for ‘Last Month’, but as with our production server I can’t reload the saved version. Any one have any idea why?
Hope all of that made sense. Am happy to provide screenshots / screencast to clarify if not… Fingers crossed there is an easy solution to this!
have been creating a number of new charts in DV
module. In the main they work perfectly, however
with certain charts, the parameters are not saved.
For example I can build a chart which displays fine.
I then save that same chart into my favourites, but
if I re-load the chart, I get the error ‘No Periods
Selected’.
I have been trying to identify the issue, but have
been unable to associate it with a specific DE /
Indicator, a particular chart or a particular
representation (swapping around Series / Category /
Filter). I think the issue arises only when
selecting the relative period ‘Last month’. For
example I created a chart showing district
positivity rate for the last 12 months. I can save
and reload this chart without any problems. However
if I change the relative period to last month, while
the chart can be saved, it gives the error ‘No
Periods Selected’ when one tries to reload it. I
obviously can’t test this on the online dhis2.org demo as the Sierra
Leone data doesn’t extend to last month, but I have
tried it on a test instance where I have input some
fake data and then visualised the data for ‘Last
Month’, but as with our production server I can’t
reload the saved version. Any one have any idea why?
Hope all of that made sense. Am happy to provide
screenshots / screencast to clarify if not…
Fingers crossed there is an easy solution to this!
Cheers
Dan
_______________________________________________
Mailing list: [https://launchpad.net/~dhis2-users](https://launchpad.net/%7Edhis2-users)
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : [https://launchpad.net/~dhis2-users](https://launchpad.net/%7Edhis2-users)
More help : [https://help.launchpad.net/ListHelp](https://help.launchpad.net/ListHelp)
That was fast - presume there will be a new .war file uploaded to [dhis2.org](http://dhis2.org)?
Cheers
Dan
On 29/10/12 16:36, Jan Henrik Øverland wrote:
I have packported a fix to 2.9.
On Mon, Oct 29, 2012 at 2:43 PM, Jan Henrik Øverland <janhenrik.overland@gmail.com> > > wrote:
Hi Dan, I was able to reproduce it locally, so I will look into it. Thanks for reporting.
On Mon, Oct 29, 2012 at 1:18 PM, Daniel Bridges <dbridges@akrosresearch.com> > > > wrote:
We have been creating a number of new charts in DV module. In the main they work perfectly, however with certain charts, the parameters are not saved. For example I can build a chart which displays fine. I then save that same chart into my favourites, but if I re-load the chart, I get the error 'No Periods Selected'.
I have been trying to identify the issue, but have been unable to associate it with a specific DE / Indicator, a particular chart or a particular representation (swapping around Series / Category / Filter). I think the issue arises only when selecting the relative period 'Last month'. For example I created a chart showing district positivity rate for the last 12 months. I can save and reload this chart without any problems. However if I change the relative period to last month, while the chart can be saved, it gives the error 'No Periods Selected' when one tries to reload it. I obviously can't test this on the online [dhis2.org](http://dhis2.org) demo as the Sierra Leone data doesn't extend to last month, but I have tried it on a test instance where I have input some fake data and then visualised the data for 'Last Month', but as with our production server I can't reload the saved version. Any one have any idea why?
Hope all of that made sense. Am happy to provide screenshots / screencast to clarify if not.... Fingers crossed there is an easy solution to this!
Cheers
Dan
_______________________________________________
Mailing list: [https://launchpad.net/~dhis2-users](https://launchpad.net/%7Edhis2-users)
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : [https://launchpad.net/~dhis2-users](https://launchpad.net/%7Edhis2-users)
More help : [https://help.launchpad.net/ListHelp](https://help.launchpad.net/ListHelp)