configuring patient tracker

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).

···

Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

···

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Have you assigned dataelements for your program stages?

image

image

image

image

···

Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Yes I have!

Regards

Jacob

image

image

image

image

···

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

  • what version of dhis are you using (Profile->About DHIS2),
  • have you got any error log on from your browser?

also try one more time after clearing your browser cache.

image

image

image

image

···

Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:21 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Yes I have!

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

image

image

image

image

···

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units

image

image

image

image

···

Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

image

image

image

image

···

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

Any pointers to this?

Thanks

Jacob

ATT001.txt (247 Bytes)

···

From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob

Sent: Thursday, September 25, 2014 2:37 PM

To: Abyot Gizaw

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:30 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Abyot,

I also get the problem Jacob described in his last mail. It would be really helpful if you could look into what the problem might be.

Thanks

Busoye

···

On 25 Sep 2014, at 15:23, Siwiti, Jacob <jsiwiti@path.org> wrote:

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

<image007.png>
However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

<image008.png>
Any pointers to this?

Thanks
Jacob
From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob
Sent: Thursday, September 25, 2014 2:37 PM
To: Abyot Gizaw
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards
Jacob
From: Abyot Gizaw [mailto:abyota@gmail.com]
Sent: Thursday, September 25, 2014 2:30 PM
To: Siwiti, Jacob
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] configuring patient tracker

Program -> then you will have list of programs -> clicking on the row will give you a context menu -> assign program to organisation units

---
Thank you,
Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob <jsiwiti@path.org> wrote:
Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards
Jacob
From: Abyot Gizaw [mailto:abyota@gmail.com]
Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?

---
Thank you,
Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob <jsiwiti@path.org> wrote:
Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)
<image001.png>
<image002.png>

<image003.png>
<image004.png>
Despite having done this, the form is still not available.

Regards
Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]
Sent: Thursday, September 25, 2014 2:03 PM
To: Siwiti, Jacob
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).

---
Thank you,
Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob <jsiwiti@path.org> wrote:
Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

<image005.png>

Regards
Jacob

_______________________________________________
Mailing list: DHIS 2 Users in Launchpad
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : DHIS 2 Users in Launchpad
More help : ListHelp - Launchpad Help

_______________________________________________
Mailing list: DHIS 2 Users in Launchpad
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : DHIS 2 Users in Launchpad
More help : ListHelp - Launchpad Help
_______________________________________________
Mailing list: DHIS 2 Users in Launchpad
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : DHIS 2 Users in Launchpad
More help : ListHelp - Launchpad Help

Hi,

I am not sure which version are you using, but I have found one issue that relates to changes made in the web-api. I Have made a fix few hours ago (for 2.16, version 16466). The trunk has no problem.

If you are using 2.16, please upgrade to the latest version.

image

image

image

image

image

image

···

Thank you,

Abyot.

On Thu, Sep 25, 2014 at 4:23 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

Any pointers to this?

Thanks

Jacob

From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob

Sent: Thursday, September 25, 2014 2:37 PM

To: Abyot Gizaw

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:30 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Abyot,

Find below the version details and advise please.

Regards

Jacob

image

image

image

image

image

image

···

Hi,

I am not sure which version are you using, but I have found one issue that relates to changes made in the web-api. I Have made a fix few hours ago (for 2.16, version 16466). The trunk has no problem.

If you are using 2.16, please upgrade to the latest version.


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 4:23 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

Any pointers to this?

Thanks

Jacob

From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob

Sent: Thursday, September 25, 2014 2:37 PM

To: Abyot Gizaw

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:30 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Can you update to the latest version of 2.16? Or use trunk if you are in test/dev stage?

image

image

image

image

image

image

image

···

On Sep 25, 2014 5:04 PM, “Siwiti, Jacob” jsiwiti@path.org wrote:

Hi Abyot,

Find below the version details and advise please.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 4:50 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: FW: [Dhis2-users] configuring patient tracker

Hi,

I am not sure which version are you using, but I have found one issue that relates to changes made in the web-api. I Have made a fix few hours ago (for 2.16, version 16466). The trunk has no problem.

If you are using 2.16, please upgrade to the latest version.


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 4:23 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

Any pointers to this?

Thanks

Jacob

From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob

Sent: Thursday, September 25, 2014 2:37 PM

To: Abyot Gizaw

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:30 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Jacob,

I think you should try switiching to 2.17 (trunk) as that has seen quite a lot of improvement.

Get it from here:

https://apps.dhis2.org/ci/job/dhis-trunk/lastSuccessfulBuild/artifact/dhis-2/dhis-web/dhis-web-portal/target/dhis.war

Knut

image

image

image

image

image

image

image

···

On Thu, Sep 25, 2014 at 5:04 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Find below the version details and advise please.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 4:50 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: FW: [Dhis2-users] configuring patient tracker

Hi,

I am not sure which version are you using, but I have found one issue that relates to changes made in the web-api. I Have made a fix few hours ago (for 2.16, version 16466). The trunk has no problem.

If you are using 2.16, please upgrade to the latest version.


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 4:23 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

Any pointers to this?

Thanks

Jacob

From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob

Sent: Thursday, September 25, 2014 2:37 PM

To: Abyot Gizaw

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:30 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

Skype: knutstar

http://dhis2.org

Hi Knut/Abyot,

That may be a bit of a challenge for me as the instance I am currently using was setup by our colleague on our Linode infrastructure. Tell me; would the upgrade be seamless on my current version if I asked them to do it or perhaps it requires a lot more to do?

Regards

Jacob

image

image

image

image

image

image

image

···

Hi Jacob,

I think you should try switiching to 2.17 (trunk) as that has seen quite a lot of improvement.

Get it from here:

https://apps.dhis2.org/ci/job/dhis-trunk/lastSuccessfulBuild/artifact/dhis-2/dhis-web/dhis-web-portal/target/dhis.war

Knut

On Thu, Sep 25, 2014 at 5:04 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Find below the version details and advise please.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 4:50 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: FW: [Dhis2-users] configuring patient tracker

Hi,

I am not sure which version are you using, but I have found one issue that relates to changes made in the web-api. I Have made a fix few hours ago (for 2.16, version 16466). The trunk has no problem.

If you are using 2.16, please upgrade to the latest version.


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 4:23 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

Any pointers to this?

Thanks

Jacob

From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob

Sent: Thursday, September 25, 2014 2:37 PM

To: Abyot Gizaw

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:30 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

Skype: knutstar

http://dhis2.org

It should require just stopping Tomcat, replacing the .war file and restarting.

Knut

image

image

image

image

image

image

image

···

On Thu, Sep 25, 2014 at 5:22 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Knut/Abyot,

That may be a bit of a challenge for me as the instance I am currently using was setup by our colleague on our Linode infrastructure. Tell me; would the upgrade be seamless on my current version if I asked them to do it or perhaps it requires a lot more to do?

Regards

Jacob

From: Knut Staring [mailto:knutst@gmail.com]

Sent: Thursday, September 25, 2014 5:16 PM

To: Siwiti, Jacob

Cc: Abyot Gizaw; dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] FW: configuring patient tracker

Hi Jacob,

I think you should try switiching to 2.17 (trunk) as that has seen quite a lot of improvement.

Get it from here:

https://apps.dhis2.org/ci/job/dhis-trunk/lastSuccessfulBuild/artifact/dhis-2/dhis-web/dhis-web-portal/target/dhis.war

Knut

On Thu, Sep 25, 2014 at 5:04 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Find below the version details and advise please.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 4:50 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: FW: [Dhis2-users] configuring patient tracker

Hi,

I am not sure which version are you using, but I have found one issue that relates to changes made in the web-api. I Have made a fix few hours ago (for 2.16, version 16466). The trunk has no problem.

If you are using 2.16, please upgrade to the latest version.


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 4:23 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

Any pointers to this?

Thanks

Jacob

From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob

Sent: Thursday, September 25, 2014 2:37 PM

To: Abyot Gizaw

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:30 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

Skype: knutstar

http://dhis2.org


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

Skype: knutstar

http://dhis2.org

Hi Jacob

If you were using the dhis2-tools it would mostly be a matter of running:

dhis2-deploy-war -t

But if you are doing it manually, let me elaborate a bit on Knut’s answer.

  1. stop the dhis server

  2. make a backup of the database

  3. remove everything in the webapps directory (typically dhis.war and a directory called ./dhis)

  4. copy the downloaded war into the webapps directory

  5. if you are using a frontend proxy (like nginx) then clear whatever might be in nginx cache directory

  6. restart tomcat

If you ask your colleague to go through the steps above then, yes, you should experience a “seamless” upgrade.

Regards

Bob

image

image

image

image

image

image

image

···

On 25 September 2014 16:25, Knut Staring knutst@gmail.com wrote:

Knut

It should require just stopping Tomcat, replacing the .war file and restarting.


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

On Thu, Sep 25, 2014 at 5:22 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Knut/Abyot,

That may be a bit of a challenge for me as the instance I am currently using was setup by our colleague on our Linode infrastructure. Tell me; would the upgrade be seamless on my current version if I asked them to do it or perhaps it requires a lot more to do?

Regards

Jacob

From: Knut Staring [mailto:knutst@gmail.com]

Sent: Thursday, September 25, 2014 5:16 PM

To: Siwiti, Jacob

Cc: Abyot Gizaw; dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] FW: configuring patient tracker

Hi Jacob,

I think you should try switiching to 2.17 (trunk) as that has seen quite a lot of improvement.

Get it from here:

https://apps.dhis2.org/ci/job/dhis-trunk/lastSuccessfulBuild/artifact/dhis-2/dhis-web/dhis-web-portal/target/dhis.war

Knut

On Thu, Sep 25, 2014 at 5:04 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Find below the version details and advise please.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 4:50 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: FW: [Dhis2-users] configuring patient tracker

Hi,

I am not sure which version are you using, but I have found one issue that relates to changes made in the web-api. I Have made a fix few hours ago (for 2.16, version 16466). The trunk has no problem.

If you are using 2.16, please upgrade to the latest version.


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 4:23 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

Any pointers to this?

Thanks

Jacob

From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob

Sent: Thursday, September 25, 2014 2:37 PM

To: Abyot Gizaw

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:30 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

Skype: knutstar

http://dhis2.org


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

Skype: knutstar

http://dhis2.org

Thanks Bob/Knut,

We will try this and then give you feedback on how it went.

Regards
Jacob

···

From: Bob Jolliffe [mailto:bobjolliffe@gmail.com]
Sent: Thursday, September 25, 2014 5:55 PM
To: Knut Staring
Cc: Siwiti, Jacob; dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] FW: configuring patient tracker

Hi Jacob

If you were using the dhis2-tools it would mostly be a matter of running:

dhis2-deploy-war -t <instance name>

But if you are doing it manually, let me elaborate a bit on Knut's answer.

1. stop the dhis server
2. make a backup of the database
3. remove *everything* in the webapps directory (typically dhis.war and a directory called ./dhis)
4. copy the downloaded war into the webapps directory
5. if you are using a frontend proxy (like nginx) then clear whatever might be in nginx cache directory
6. restart tomcat

If you ask your colleague to go through the steps above then, yes, you should experience a "seamless" upgrade.

Regards
Bob

On 25 September 2014 16:25, Knut Staring <knutst@gmail.com<mailto:knutst@gmail.com>> wrote:
It should require just stopping Tomcat, replacing the .war file and restarting.

Knut

On Thu, Sep 25, 2014 at 5:22 PM, Siwiti, Jacob <jsiwiti@path.org<mailto:jsiwiti@path.org>> wrote:
Hi Knut/Abyot,

That may be a bit of a challenge for me as the instance I am currently using was setup by our colleague on our Linode infrastructure. Tell me; would the upgrade be seamless on my current version if I asked them to do it or perhaps it requires a lot more to do?

Regards
Jacob

From: Knut Staring [mailto:knutst@gmail.com<mailto:knutst@gmail.com>]
Sent: Thursday, September 25, 2014 5:16 PM
To: Siwiti, Jacob
Cc: Abyot Gizaw; dhis2-users@lists.launchpad.net<mailto:dhis2-users@lists.launchpad.net>
Subject: Re: [Dhis2-users] FW: configuring patient tracker

Hi Jacob,

I think you should try switiching to 2.17 (trunk) as that has seen quite a lot of improvement.

Get it from here:
https://apps.dhis2.org/ci/job/dhis-trunk/lastSuccessfulBuild/artifact/dhis-2/dhis-web/dhis-web-portal/target/dhis.war

Knut

On Thu, Sep 25, 2014 at 5:04 PM, Siwiti, Jacob <jsiwiti@path.org<mailto:jsiwiti@path.org>> wrote:
Hi Abyot,

Find below the version details and advise please.

[cid:image001.png@01CFD8EA.7C2F8670]

Regards
Jacob
From: Abyot Gizaw [mailto:abyota@gmail.com<mailto:abyota@gmail.com>]
Sent: Thursday, September 25, 2014 4:50 PM
To: Siwiti, Jacob
Cc: dhis2-users@lists.launchpad.net<mailto:dhis2-users@lists.launchpad.net>
Subject: Re: FW: [Dhis2-users] configuring patient tracker

Hi,

I am not sure which version are you using, but I have found one issue that relates to changes made in the web-api. I Have made a fix few hours ago (for 2.16, version 16466). The trunk has no problem.

If you are using 2.16, please upgrade to the latest version.

---
Thank you,
Abyot.

On Thu, Sep 25, 2014 at 4:23 PM, Siwiti, Jacob <jsiwiti@path.org<mailto:jsiwiti@path.org>> wrote:
Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

[cid:image002.png@01CFD8EA.7C2F8670]
However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

[cid:image003.png@01CFD8EA.7C2F8670]
Any pointers to this?

Thanks
Jacob
From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti<mailto:dhis2-users-bounces%2Bjsiwiti>=path.org@lists.launchpad.net<mailto:path.org@lists.launchpad.net>] On Behalf Of Siwiti, Jacob
Sent: Thursday, September 25, 2014 2:37 PM
To: Abyot Gizaw

Hi

I also had same issue with tracker capture as Siwiti mention above and was settle with updating with 2.16 R 16468 and 2.17-SNAPSHOT R 16832.

  • But drop down list in the forms are not working properly.

image

image

image

image

image

image

image

···

On Thu, Sep 25, 2014 at 9:30 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Thanks Bob/Knut,

We will try this and then give you feedback on how it went.

Regards

Jacob

From: Bob Jolliffe [mailto:bobjolliffe@gmail.com]

Sent: Thursday, September 25, 2014 5:55 PM

To: Knut Staring

Cc: Siwiti, Jacob; dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] FW: configuring patient tracker

Hi Jacob

If you were using the dhis2-tools it would mostly be a matter of running:

dhis2-deploy-war -t

But if you are doing it manually, let me elaborate a bit on Knut’s answer.

  1. stop the dhis server
  1. make a backup of the database
  1. remove everything in the webapps directory (typically dhis.war and a directory called ./dhis)
  1. copy the downloaded war into the webapps directory
  1. if you are using a frontend proxy (like nginx) then clear whatever might be in nginx cache directory
  1. restart tomcat

If you ask your colleague to go through the steps above then, yes, you should experience a “seamless” upgrade.

Regards

Bob

On 25 September 2014 16:25, Knut Staring knutst@gmail.com wrote:

It should require just stopping Tomcat, replacing the .war file and restarting.

Knut

On Thu, Sep 25, 2014 at 5:22 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Knut/Abyot,

That may be a bit of a challenge for me as the instance I am currently using was setup by our colleague on our Linode infrastructure. Tell me; would the upgrade be seamless on my current version if I asked them to do it or perhaps it requires a lot more to do?

Regards

Jacob

From: Knut Staring [mailto:knutst@gmail.com]

Sent: Thursday, September 25, 2014 5:16 PM

To: Siwiti, Jacob

Cc: Abyot Gizaw;
dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] FW: configuring patient tracker

Hi Jacob,

I think you should try switiching to 2.17 (trunk) as that has seen quite a lot of improvement.

Get it from here:

https://apps.dhis2.org/ci/job/dhis-trunk/lastSuccessfulBuild/artifact/dhis-2/dhis-web/dhis-web-portal/target/dhis.war

Knut

On Thu, Sep 25, 2014 at 5:04 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Find below the version details and advise please.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 4:50 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: FW: [Dhis2-users] configuring patient tracker

Hi,

I am not sure which version are you using, but I have found one issue that relates to changes made in the web-api. I Have made a fix few hours ago (for 2.16, version 16466). The trunk has no problem.

If you are using 2.16, please upgrade to the latest version.


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 4:23 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

So I seem to have run into a wall, I am able to register and do enrollment at the first instance as shown below:

However am unable to add/create any events under data entry as these are not giving me the create new event option instead I get the not yet enrolled please enroll. I expect since I do registration and enrollment at the same time, the enrollment is supposed to pick the date of enrollment and date of birth which I entered in the registration form and display this then allow me to enter or create a new event.

See below:

Any pointers to this?

Thanks

Jacob

From: Dhis2-users [mailto:dhis2-users-bounces+jsiwiti=path.org@lists.launchpad.net] On Behalf Of Siwiti, Jacob

Sent: Thursday, September 25, 2014 2:37 PM

To: Abyot Gizaw

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Abyot,

That assignment of the program to OU was the missing bit, it’s now working thanks.

Let me move on to the next bits to configure, Thank you so much and will post something if I do get stuck J

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:30 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Program → then you will have list of programs → clicking on the row will give you a context menu → assign program to organisation units


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:27 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Abyot,

While we are still trouble shooting at this, I was wondering that I may have missed the bit for assigning an org unit to a program, how can I go about that and see if it will resolve the form issue.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:20 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Have you assigned dataelements for your program stages?


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 2:17 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi Abyot,

Thanks for your response, am sending you a couple of screenshots to show what I have setup (attributes/stages/data elements/program/)

Despite having done this, the form is still not available.

Regards

Jacob

From: Abyot Gizaw [mailto:abyota@gmail.com]

Sent: Thursday, September 25, 2014 2:03 PM

To: Siwiti, Jacob

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] configuring patient tracker

Hi Jacob,

Have you created attributes and assigned them to your program?

Also, for a program to be available for registration/enrollment, it needs to have attribute(s), stage(s), and stage(s) with dataelements.

If all this is in place, see any log pressing F12 (if you are on chrome).


Thank you,

Abyot.

On Thu, Sep 25, 2014 at 1:57 PM, Siwiti, Jacob jsiwiti@path.org wrote:

Hi ,

I am trying to configure patient tracker on a test instance, The test instance is online and working ok. What I am struggling with is getting the registration form to work. I have setup my initial option sets, my data elements as well as program and program stages however when I attempt to register the form is unavailable I get the below captured screenshot. Anyone kindly help.

Regards

Jacob


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

Skype: knutstar

http://dhis2.org

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

Skype: knutstar

http://dhis2.org


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp