You should not set an aggregation start level then analytics will aggregate from the lowest level up. Only if you have set a start level to e.g. OU4 then it will only use values captured from OU4 and above to higher levels so that now does not seem like your problem.
I am sorry other than the allocation of orgunitgroups and whether you are filtering on groups or not I cant think of anything else that can cause it. Maybe someone else has some ideas.
···
Regards,
Elmarie Claasen
Project Manager
Health Information Systems Program
Tel: 041-367 1027
Cell: 082 374 2209
E-mail: elmarie@hisp.org
Skype: elmarie.claasen52
This message and any attachments are subject to a disclaimer published at http://www.hisp.org/policies.html#comms_disclaimer . Please read the disclaimer before opening any attachment or taking any other action in terms of this electronic transmission.
If you cannot access the disclaimer, kindly send an email to disclaimer@hisp.org and a copy will be provided to you. By replying to this e-mail or opening any attachment you agree to be bound by the provisions of the disclaimer.
From: Ifeanyi Okoye [mailto:ifeanyiokoye@yahoo.com]
Sent: 16 August 2016 01:30 PM
To: Elmarie Claasen; ‘Derek Kahongo Mukenge’
Cc: dhis2-users@lists.launchpad.net; ‘Lars Helge Øverland’; ‘DHIS 2 Developers list’
Subject: Re: [Dhis2-devs] [Dhis2-users] About filter in Data visualizer
Hello Elmarie,
Forgive me, but I am not sure where to set the aggregation start level.
For the reports, what we have started to do is to select org units at levels (Comprehensive, Satellite, and Outreach) when we noted this issue. I do not know if this is a wrong method.
But this is a big concern as we would not like to misrepresent the data.
Thank you.
Warm Regards,
Ifeanyi
Read DrMaestro’s Blog
www.ifeanyiokoye.com
From: Elmarie Claasen elmarie@hisp.org
To: ‘Ifeanyi Okoye’ ifeanyiokoye@yahoo.com; ‘Derek Kahongo Mukenge’ derek.elijah@gmail.com
Cc: dhis2-users@lists.launchpad.net; ‘Lars Helge Øverland’ larshelge@gmail.com; ‘DHIS 2 Developers list’ dhis2-devs@lists.launchpad.net
Sent: Monday, August 15, 2016 2:46 PM
Subject: RE: [Dhis2-devs] [Dhis2-users] About filter in Data visualizer
Hi Ifeanyi,
Did you perhaps define the aggregation start level for your data elements as OU4 or are you also filtering on orgunitgroups in the report which can cause the inconsistency in reports at different levels?
Regards,
Elmarie Claasen
Project Manager
Health Information Systems Program
Tel: 041-367 1027
Cell: 082 374 2209
E-mail: elmarie@hisp.org
Skype: elmarie.claasen52
This message and any attachments are subject to a disclaimer published at http://www.hisp.org/policies.html#comms_disclaimer . Please read the disclaimer before opening any attachment or taking any other action in terms of this electronic transmission.
If you cannot access the disclaimer, kindly send an email to disclaimer@hisp.org and a copy will be provided to you. By replying to this e-mail or opening any attachment you agree to be bound by the provisions of the disclaimer.
From: Ifeanyi Okoye [mailto:ifeanyiokoye@yahoo.com]
Sent: 15 August 2016 02:38 PM
To: Derek Kahongo Mukenge; Elmarie Claasen
Cc: dhis2-users@lists.launchpad.net; Lars Helge Øverland; DHIS 2 Developers list
Subject: Re: [Dhis2-devs] [Dhis2-users] About filter in Data visualizer
Hello Everyone,
I had reported this a few weeks ago and did not get any response.
We have data entered at OU4 (comprehensive sites), OU5 (satellite sites), and OU6 (outreach sites).
When we do tables or charts and select the parent OU (OU1), the data displayed is for OU4 (comprehensive sites) alone. When I select the different levels, I get a different output.
I have taken the time to compare the outputs from the tables and the data entry forms and I see that for some reason, DHIS isn’t aggregating data below OU4 into the parent OU. Not sure why.
We use DHIS2. 22.
Any explanation or help would be most appreciated.
Warm Regards,
Ifeanyi
Read DrMaestro’s Blog
www.ifeanyiokoye.com
From: Derek Kahongo Mukenge derek.elijah@gmail.com
To: Elmarie Claasen elmarie@hisp.org
Cc: dhis2-users@lists.launchpad.net; Lars Helge Øverland larshelge@gmail.com; DHIS 2 Developers list dhis2-devs@lists.launchpad.net
Sent: Monday, August 15, 2016 12:00 PM
Subject: Re: [Dhis2-devs] [Dhis2-users] About filter in Data visualizer
Hi Everybody,
I’m facing the same issue with 2.23. As Elmarie said, I checked but everything stand as same as before. I think that it may be a bug. Is there another way to resolve this?
2016-08-09 21:56 GMT+01:00 Elmarie Claasen elmarie@hisp.org:
Carlos,
From my experience this can be due to one of 2 reasons:
-
Check that you don’t have any data integrity errors. If for instance you have integrity errors on exclusive groupsets the data in reports will be affected when you display data by OUGroup or OUGroupset.
-
Check that the OUGroup/OUGroupset you are filtering on is assigned to the lowest level of the hierarchy e.g. if the filter you apply is on OU at Level 5 but you have data at a level 6 in the database as well then the OUgroup filter will be affected if the level 6 OU does not belong to the same OUGroup/Groupset. In essence if your data entry is at multiple levels and the level you are filtering on has data at lower level where those orgunits does not belong to the same group/groupset.
Hope this helps.
Regards,
Elmarie Claasen
Project Manager
Health Information Systems Program
Tel: 041-367 1027
Cell: 082 374 2209
E-mail: elmarie@hisp.org
Skype: elmarie.claasen52
This message and any attachments are subject to a disclaimer published at http://www.hisp.org/policies. html#comms_disclaimer . Please read the disclaimer before opening any attachment or taking any other action in terms of this electronic transmission.
If you cannot access the disclaimer, kindly send an email to disclaimer@hisp.org and a copy will be provided to you. By replying to this e-mail or opening any attachment you agree to be bound by the provisions of the disclaimer.
From: Dhis2-devs [mailto:dhis2-devs-bounces+ elmarie=hisp.org@lists. launchpad.net] On Behalf Of Carlos Nyembwe
Sent: 08 August 2016 05:21 PM
To: dhis2-users@lists.launchpad. net
Cc: Lars Helge Øverland; DHIS 2 Developers list
Subject: [Dhis2-devs] About filter in Data visualizer
Hi all
I have a problem for making my data visualizer,
The problem is, if I select organisation unit only, I see the data correctly, but If I add my selection for filter in group ou in the same place with organisation unit, I find different data, No matter for that but, for the same group ou, I have a group set ou that I can select this group also, I don’t find the same result like the first Filter in organisation ou Group.
What’s the problem and what’s the good data
regards
–
Carlos Nyembwe
I’m just a Computer Scientist
Skype*: carloscnk1***
Cell*:*** (+243)813166381
Find me in**: | Google Plus | **Linkedin | Facebook | T witter |
This message and any attachments are subject to a disclaimer published at http://www.hisp.org/policies.h tml#comms_disclaimer. Please read the disclaimer before opening any attachment or taking any other action in terms of this electronic transmission. If you cannot access the disclaimer, kindly send an email to disclaimer@hisp.org and a copy will be provided to you. By replying to this e-mail or opening any attachment you agree to be bound by the provisions of the disclaimer.
Mailing list: https://launchpad.net/~dhis2- users
Post to : dhis2-users@lists.launchpad. net
Unsubscribe : https://launchpad.net/~dhis2- users
More help : https://help.launchpad.net/ ListHelp
–
Derek Kahongo Mukenge
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
This message and any attachments are subject to a disclaimer published at http://www.hisp.org/policies. html#comms_disclaimer. Please read the disclaimer before opening any attachment or taking any other action in terms of this electronic transmission. If you cannot access the disclaimer, kindly send an email to disclaimer@hisp.org and a copy will be provided to you. By replying to this e-mail or opening any attachment you agree to be bound by the provisions of the disclaimer.
