Unable to correct reporting period in Tracker capture

Hello all,

I am experiencing this strange issue in Tracker capture data entry. I create a program stage and I am able to select a reporting date for that stage from 1897 to the CURRENT DATE (see SCREENSHOT 1).

However, when I try to change the reporting date later on I CANNOT pick any date outside of year 2017 (see SCREENSHOT 2). Any ideas why this is happening? Thanks for putting your thoughts into this!

(Just FYI, I found that manually entering the date works, but anyhow, I think it should be available from the calendar as well).

SCREENSHOT 1

SCREENSHOT 2

Georgi Chakarov, CIA | georgi@logicaloutcomes.net | +1-647-478-5634 x 104 | LogicalOutcomes c/o Centre for Social Innovation, 720 Bathurst Street, Toronto Canada M5S 2R4 | * You may unsubscribe from receiving commercial electronic messages from LogicalOutcomes by emailing *info@logicaloutcomes.net

Dear Georgi,

Thanks for sharing, it very difficult to understand the cause from the screen captures.

Check also the computer date setting to make sure its not set in the past.

You can also share the screen captures of the stage settings for this program.

Regards

···

On Tue, Aug 1, 2017 at 11:23 AM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hello all,

I am experiencing this strange issue in Tracker capture data entry. I create a program stage and I am able to select a reporting date for that stage from 1897 to the CURRENT DATE (see SCREENSHOT 1).

However, when I try to change the reporting date later on I CANNOT pick any date outside of year 2017 (see SCREENSHOT 2). Any ideas why this is happening? Thanks for putting your thoughts into this!

(Just FYI, I found that manually entering the date works, but anyhow, I think it should be available from the calendar as well).

SCREENSHOT 1

SCREENSHOT 2

Georgi Chakarov, CIA | georgi@logicaloutcomes.net | +1-647-478-5634 x 104 | LogicalOutcomes c/o Centre for Social Innovation, 720 Bathurst Street, Toronto Canada M5S 2R4 | * You may unsubscribe from receiving commercial electronic messages from LogicalOutcomes by emailing *info@logicaloutcomes.net


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

Hi Prosper,

Computer date is current date (not set to show the past).

Please find a screenshot of the stage settings.

···

Dear Georgi,

Thanks for sharing, it very difficult to understand the cause from the screen captures.

Check also the computer date setting to make sure its not set in the past.

You can also share the screen captures of the stage settings for this program.

Regards

Prosper Behumbiize, MPH

DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Tue, Aug 1, 2017 at 11:23 AM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hello all,

I am experiencing this strange issue in Tracker capture data entry. I create a program stage and I am able to select a reporting date for that stage from 1897 to the CURRENT DATE (see SCREENSHOT 1).

However, when I try to change the reporting date later on I CANNOT pick any date outside of year 2017 (see SCREENSHOT 2). Any ideas why this is happening? Thanks for putting your thoughts into this!

(Just FYI, I found that manually entering the date works, but anyhow, I think it should be available from the calendar as well).

SCREENSHOT 1

SCREENSHOT 2

Georgi Chakarov, CIA | georgi@logicaloutcomes.net | +1-647-478-5634 x 104 | LogicalOutcomes c/o Centre for Social Innovation, 720 Bathurst Street, Toronto Canada M5S 2R4 | * You may unsubscribe from receiving commercial electronic messages from LogicalOutcomes by emailing *info@logicaloutcomes.net


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Dear Georgi,

Thanks for sharing,

Wanted to see if you are using period type and that okay.

While entering data, the stage you are using is not supposed to allow future dates and thats by design you dont enter future date events they could happened before today or today.

You also selected hide due date, so you cant schedule any future events.

The manual entry that you are forcing on this is a bug, this is also true with enrollment date and there is a jira issues to this

DHIS2-1907

We can also add it for event report date

Regards

image

···

On Tue, Aug 1, 2017 at 12:05 PM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hi Prosper,

Computer date is current date (not set to show the past).

Please find a screenshot of the stage settings.

From: Prosper BT [mailto:ptb3000@gmail.com]

Sent: Tuesday, August 1, 2017 11:51 AM

To: Georgi Chakarov georgi@logicaloutcomes.net

Cc: DHIS 2 Developers list dhis2-devs@lists.launchpad.net; DHIS Users dhis2-users@lists.launchpad.net; Paula Richardson prichardson@usc-canada.org

Subject: Re: [Dhis2-users] Unable to correct reporting period in Tracker capture

Dear Georgi,

Thanks for sharing, it very difficult to understand the cause from the screen captures.

Check also the computer date setting to make sure its not set in the past.

You can also share the screen captures of the stage settings for this program.

Regards

Prosper Behumbiize, MPH

DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Tue, Aug 1, 2017 at 11:23 AM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hello all,

I am experiencing this strange issue in Tracker capture data entry. I create a program stage and I am able to select a reporting date for that stage from 1897 to the CURRENT DATE (see SCREENSHOT 1).

However, when I try to change the reporting date later on I CANNOT pick any date outside of year 2017 (see SCREENSHOT 2). Any ideas why this is happening? Thanks for putting your thoughts into this!

(Just FYI, I found that manually entering the date works, but anyhow, I think it should be available from the calendar as well).

SCREENSHOT 1

SCREENSHOT 2

Georgi Chakarov, CIA | georgi@logicaloutcomes.net | +1-647-478-5634 x 104 | LogicalOutcomes c/o Centre for Social Innovation, 720 Bathurst Street, Toronto Canada M5S 2R4 | * You may unsubscribe from receiving commercial electronic messages from LogicalOutcomes by emailing *info@logicaloutcomes.net


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

Hello Prosper,

My issues is quite the opposite – I am not able to select a date in the past. Let me simplify, I entered data at 01 May 2017 and I realize the data should have been entered on 01 May 2016. I can’t correct my report date because in the calendar I can only select a date within 2017. Years before 2017 are simply not showing.

See this screenshot, I can choose only 2017 (no years before 2017)

image

···

Dear Georgi,

Thanks for sharing,

Wanted to see if you are using period type and that okay.

While entering data, the stage you are using is not supposed to allow future dates and thats by design you dont enter future date events they could happened before today or today.

You also selected hide due date, so you cant schedule any future events.

The manual entry that you are forcing on this is a bug, this is also true with enrollment date and there is a jira issues to this

DHIS2-1907

We can also add it for event report date

Regards

Prosper Behumbiize, MPH

DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Tue, Aug 1, 2017 at 12:05 PM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hi Prosper,

Computer date is current date (not set to show the past).

Please find a screenshot of the stage settings.

From: Prosper BT [mailto:ptb3000@gmail.com]

Sent: Tuesday, August 1, 2017 11:51 AM

To: Georgi Chakarov georgi@logicaloutcomes.net

Cc: DHIS 2 Developers list dhis2-devs@lists.launchpad.net; DHIS Users <dhis2-users@lists.launchpad.net >; Paula Richardson prichardson@usc-canada.org

Subject: Re: [Dhis2-users] Unable to correct reporting period in Tracker capture

Dear Georgi,

Thanks for sharing, it very difficult to understand the cause from the screen captures.

Check also the computer date setting to make sure its not set in the past.

You can also share the screen captures of the stage settings for this program.

Regards

Prosper Behumbiize, MPH

DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Tue, Aug 1, 2017 at 11:23 AM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hello all,

I am experiencing this strange issue in Tracker capture data entry. I create a program stage and I am able to select a reporting date for that stage from 1897 to the CURRENT DATE (see SCREENSHOT 1).

However, when I try to change the reporting date later on I CANNOT pick any date outside of year 2017 (see SCREENSHOT 2). Any ideas why this is happening? Thanks for putting your thoughts into this!

(Just FYI, I found that manually entering the date works, but anyhow, I think it should be available from the calendar as well).

SCREENSHOT 1

SCREENSHOT 2

Georgi Chakarov, CIA | georgi@logicaloutcomes.net | +1-647-478-5634 x 104 | LogicalOutcomes c/o Centre for Social Innovation, 720 Bathurst Street, Toronto Canada M5S 2R4 | * You may unsubscribe from receiving commercial electronic messages from LogicalOutcomes by emailing *info@logicaloutcomes.net


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Dear Goergi,

Can you check the opening date of your orgunit, data entry also take into consideration of the opening dates.

Its most likely that the opening date is this year and so cant allow entry before the open date.

Regards

image

···

On Tue, Aug 1, 2017 at 5:44 PM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hello Prosper,

My issues is quite the opposite – I am not able to select a date in the past. Let me simplify, I entered data at 01 May 2017 and I realize the data should have been entered on 01 May 2016. I can’t correct my report date because in the calendar I can only select a date within 2017. Years before 2017 are simply not showing.

See this screenshot, I can choose only 2017 (no years before 2017)

From: Prosper BT [mailto:ptb3000@gmail.com]

Sent: Tuesday, August 1, 2017 12:32 PM

To: Georgi Chakarov georgi@logicaloutcomes.net

Cc: DHIS 2 Developers list dhis2-devs@lists.launchpad.net; DHIS Users dhis2-users@lists.launchpad.net; Paula Richardson prichardson@usc-canada.org

Subject: Re: [Dhis2-users] Unable to correct reporting period in Tracker capture

Dear Georgi,

Thanks for sharing,

Wanted to see if you are using period type and that okay.

While entering data, the stage you are using is not supposed to allow future dates and thats by design you dont enter future date events they could happened before today or today.

You also selected hide due date, so you cant schedule any future events.

The manual entry that you are forcing on this is a bug, this is also true with enrollment date and there is a jira issues to this

DHIS2-1907

We can also add it for event report date

Regards

Prosper Behumbiize, MPH

DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Tue, Aug 1, 2017 at 12:05 PM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hi Prosper,

Computer date is current date (not set to show the past).

Please find a screenshot of the stage settings.

From: Prosper BT [mailto:ptb3000@gmail.com]

Sent: Tuesday, August 1, 2017 11:51 AM

To: Georgi Chakarov georgi@logicaloutcomes.net

Cc: DHIS 2 Developers list dhis2-devs@lists.launchpad.net; DHIS Users <dhis2-users@lists.launchpad.net >; Paula Richardson prichardson@usc-canada.org

Subject: Re: [Dhis2-users] Unable to correct reporting period in Tracker capture

Dear Georgi,

Thanks for sharing, it very difficult to understand the cause from the screen captures.

Check also the computer date setting to make sure its not set in the past.

You can also share the screen captures of the stage settings for this program.

Regards

Prosper Behumbiize, MPH

DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Tue, Aug 1, 2017 at 11:23 AM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hello all,

I am experiencing this strange issue in Tracker capture data entry. I create a program stage and I am able to select a reporting date for that stage from 1897 to the CURRENT DATE (see SCREENSHOT 1).

However, when I try to change the reporting date later on I CANNOT pick any date outside of year 2017 (see SCREENSHOT 2). Any ideas why this is happening? Thanks for putting your thoughts into this!

(Just FYI, I found that manually entering the date works, but anyhow, I think it should be available from the calendar as well).

SCREENSHOT 1

SCREENSHOT 2

Georgi Chakarov, CIA | georgi@logicaloutcomes.net | +1-647-478-5634 x 104 | LogicalOutcomes c/o Centre for Social Innovation, 720 Bathurst Street, Toronto Canada M5S 2R4 | * You may unsubscribe from receiving commercial electronic messages from LogicalOutcomes by emailing *info@logicaloutcomes.net


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

This is it! Thanks Prosper!

image

···

Dear Goergi,

Can you check the opening date of your orgunit, data entry also take into consideration of the opening dates.

Its most likely that the opening date is this year and so cant allow entry before the open date.

Regards

Prosper Behumbiize, MPH

DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Tue, Aug 1, 2017 at 5:44 PM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hello Prosper,

My issues is quite the opposite – I am not able to select a date in the past. Let me simplify, I entered data at 01 May 2017 and I realize the data should have been entered on 01 May 2016. I can’t correct my report date because in the calendar I can only select a date within 2017. Years before 2017 are simply not showing.

See this screenshot, I can choose only 2017 (no years before 2017)

From: Prosper BT [mailto:ptb3000@gmail.com]

Sent: Tuesday, August 1, 2017 12:32 PM

To: Georgi Chakarov georgi@logicaloutcomes.net

Cc: DHIS 2 Developers list dhis2-devs@lists.launchpad.net; DHIS Users <dhis2-users@lists.launchpad.net >; Paula Richardson prichardson@usc-canada.org

Subject: Re: [Dhis2-users] Unable to correct reporting period in Tracker capture

Dear Georgi,

Thanks for sharing,

Wanted to see if you are using period type and that okay.

While entering data, the stage you are using is not supposed to allow future dates and thats by design you dont enter future date events they could happened before today or today.

You also selected hide due date, so you cant schedule any future events.

The manual entry that you are forcing on this is a bug, this is also true with enrollment date and there is a jira issues to this

DHIS2-1907

We can also add it for event report date

Regards

Prosper Behumbiize, MPH

DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Tue, Aug 1, 2017 at 12:05 PM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hi Prosper,

Computer date is current date (not set to show the past).

Please find a screenshot of the stage settings.

From: Prosper BT [mailto:ptb3000@gmail.com]

Sent: Tuesday, August 1, 2017 11:51 AM

To: Georgi Chakarov georgi@logicaloutcomes.net

Cc: DHIS 2 Developers list dhis2-devs@lists.launchpad.net; DHIS Users <dhis2-users@lists.launchpad.net >; Paula Richardson prichardson@usc-canada.org

Subject: Re: [Dhis2-users] Unable to correct reporting period in Tracker capture

Dear Georgi,

Thanks for sharing, it very difficult to understand the cause from the screen captures.

Check also the computer date setting to make sure its not set in the past.

You can also share the screen captures of the stage settings for this program.

Regards

Prosper Behumbiize, MPH

DHIS2 Implementation| HISP Uganda

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Tue, Aug 1, 2017 at 11:23 AM, Georgi Chakarov georgi@logicaloutcomes.net wrote:

Hello all,

I am experiencing this strange issue in Tracker capture data entry. I create a program stage and I am able to select a reporting date for that stage from 1897 to the CURRENT DATE (see SCREENSHOT 1).

However, when I try to change the reporting date later on I CANNOT pick any date outside of year 2017 (see SCREENSHOT 2). Any ideas why this is happening? Thanks for putting your thoughts into this!

(Just FYI, I found that manually entering the date works, but anyhow, I think it should be available from the calendar as well).

SCREENSHOT 1

SCREENSHOT 2

Georgi Chakarov, CIA | georgi@logicaloutcomes.net | +1-647-478-5634 x 104 | LogicalOutcomes c/o Centre for Social Innovation, 720 Bathurst Street, Toronto Canada M5S 2R4 | * You may unsubscribe from receiving commercial electronic messages from LogicalOutcomes by emailing *info@logicaloutcomes.net


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp