Just curious: in 2.9 was the option in reporting rate summary to select “Based on number of registered data values” supposed to be dropped? I found it useful.
Tom
···
This message was scanned for viruses with Trend Micro ScanMail, GFI MailSecurity and GFI MailEssentials by the World Health Organization Regional Office for the Western Pacific. However, the recipient is advised to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named recipients only and is confidential. It may also be privileged or otherwise protected by law.
If you have received it in error, please notify the sender immediately by reply e-mail and delete it and any attachments from your system. You may not copy or disclose its contents to anyone.
sorry about that. The reason for removing it is that we recommend
people not to store zero values and rather rely on completeness
registrations and compulsory data elements to measure reporting rates.
Then this option would give very low scores and caused a lot of
questions.
regards, Lars
···
On Tue, Jul 31, 2012 at 9:35 AM, <hiattt@wpro.who.int> wrote:
Just curious: in 2.9 was the option in reporting rate summary to select
“Based on number of registered data values” supposed to be dropped? I found
it useful.
Tom
________________________________
This message was scanned for viruses with Trend Micro ScanMail, GFI
MailSecurity and GFI MailEssentials by the World Health Organization
Regional Office for the Western Pacific. However, the recipient is advised
to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named
recipients only and is confidential. It may also be privileged or otherwise
protected by law.
If you have received it in error, please notify the sender immediately by
reply e-mail and delete it and any attachments from your system. You may not
copy or disclose its contents to anyone.
Thanks, Lars. That makes sense. I was using it as a way to see if some reporting went on even if they didn't click the registration button.
Tom
···
-----Original Message-----
From: Lars Helge Øverland [mailto:larshelge@gmail.com]
Sent: 31 July 2012 17:02
To: Hiatt, Mr Tom (WPRO)
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] reporting rate summary options in 2.9
Hi Tom,
sorry about that. The reason for removing it is that we recommend
people not to store zero values and rather rely on completeness
registrations and compulsory data elements to measure reporting rates.
Then this option would give very low scores and caused a lot of
questions.
regards, Lars
On Tue, Jul 31, 2012 at 9:35 AM, <hiattt@wpro.who.int> wrote:
Just curious: in 2.9 was the option in reporting rate summary to select
"Based on number of registered data values" supposed to be dropped? I found
it useful.
Tom
________________________________
This message was scanned for viruses with Trend Micro ScanMail, GFI
MailSecurity and GFI MailEssentials by the World Health Organization
Regional Office for the Western Pacific. However, the recipient is advised
to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named
recipients only and is confidential. It may also be privileged or otherwise
protected by law.
If you have received it in error, please notify the sender immediately by
reply e-mail and delete it and any attachments from your system. You may not
copy or disclose its contents to anyone.
====================================================
This message was scanned for viruses with Trend Micro ScanMail, GFI MailSecurity and GFI MailEssentials by the World Health Organization Regional Office for the Western Pacific. However, the recipient is advised to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named recipients only and is confidential. It may also be privileged or otherwise protected by law.
If you have received it in error, please notify the sender immediately by reply e-mail and delete it and any attachments from your system. You may not copy or disclose its contents to anyone.
We found it quite useful as well for the same purpose and a bit
surprised to see it removed, but basically the same thing can be
accomplished through the data browser, which will also give you a
sense of the amount of data, regardless of whether it has been
completed or not.
Regards,
Jason
···
On Tue, Jul 31, 2012 at 5:28 AM, <hiattt@wpro.who.int> wrote:
Thanks, Lars. That makes sense. I was using it as a way to see if some reporting went on even if they didn't click the registration button.
Tom
-----Original Message-----
From: Lars Helge Øverland [mailto:larshelge@gmail.com]
Sent: 31 July 2012 17:02
To: Hiatt, Mr Tom (WPRO)
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] reporting rate summary options in 2.9
Hi Tom,
sorry about that. The reason for removing it is that we recommend
people not to store zero values and rather rely on completeness
registrations and compulsory data elements to measure reporting rates.
Then this option would give very low scores and caused a lot of
questions.
regards, Lars
On Tue, Jul 31, 2012 at 9:35 AM, <hiattt@wpro.who.int> wrote:
Just curious: in 2.9 was the option in reporting rate summary to select
"Based on number of registered data values" supposed to be dropped? I found
it useful.
Tom
________________________________
This message was scanned for viruses with Trend Micro ScanMail, GFI
MailSecurity and GFI MailEssentials by the World Health Organization
Regional Office for the Western Pacific. However, the recipient is advised
to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named
recipients only and is confidential. It may also be privileged or otherwise
protected by law.
If you have received it in error, please notify the sender immediately by
reply e-mail and delete it and any attachments from your system. You may not
copy or disclose its contents to anyone.
====================================================
This message was scanned for viruses with Trend Micro ScanMail, GFI MailSecurity and GFI MailEssentials by the World Health Organization Regional Office for the Western Pacific. However, the recipient is advised to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named recipients only and is confidential. It may also be privileged or otherwise protected by law.
If you have received it in error, please notify the sender immediately by reply e-mail and delete it and any attachments from your system. You may not copy or disclose its contents to anyone.
In case you are not aware of it.. Another way of doing what you say is
to set up the compulsory data elements. Click on the "edit compulsory
data elements" and set those data elements who will always have data.
Then the reporting rates will be based on the number of data sets
where those data elements have data (when selecting that option in
reporting rate viewer).
···
On Tue, Jul 31, 2012 at 11:28 AM, <hiattt@wpro.who.int> wrote:
Thanks, Lars. That makes sense. I was using it as a way to see if some reporting went on even if they didn't click the registration button.
Tom
-----Original Message-----
From: Lars Helge Øverland [mailto:larshelge@gmail.com]
Sent: 31 July 2012 17:02
To: Hiatt, Mr Tom (WPRO)
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] reporting rate summary options in 2.9
Hi Tom,
sorry about that. The reason for removing it is that we recommend
people not to store zero values and rather rely on completeness
registrations and compulsory data elements to measure reporting rates.
Then this option would give very low scores and caused a lot of
questions.
regards, Lars
On Tue, Jul 31, 2012 at 9:35 AM, <hiattt@wpro.who.int> wrote:
Just curious: in 2.9 was the option in reporting rate summary to select
"Based on number of registered data values" supposed to be dropped? I found
it useful.
Tom
________________________________
This message was scanned for viruses with Trend Micro ScanMail, GFI
MailSecurity and GFI MailEssentials by the World Health Organization
Regional Office for the Western Pacific. However, the recipient is advised
to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named
recipients only and is confidential. It may also be privileged or otherwise
protected by law.
If you have received it in error, please notify the sender immediately by
reply e-mail and delete it and any attachments from your system. You may not
copy or disclose its contents to anyone.
====================================================
This message was scanned for viruses with Trend Micro ScanMail, GFI MailSecurity and GFI MailEssentials by the World Health Organization Regional Office for the Western Pacific. However, the recipient is advised to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named recipients only and is confidential. It may also be privileged or otherwise protected by law.
If you have received it in error, please notify the sender immediately by reply e-mail and delete it and any attachments from your system. You may not copy or disclose its contents to anyone.
Thanks all for your great views, dear Lars, related to the compulsary data element, if may be you have one dataset and you find all data elements are compulsary can it make sense to make them all compulsary?? completeness rate wil be based on all data elements??
···
Muhire Andrew
HMIS/Ministry of Health
First say to yourself what you would be; and then do what you have to do..
----- Original Message -----
From: Lars Helge Øverland larshelge@gmail.com
To: hiattt@wpro.who.int
Cc: dhis2-users@lists.launchpad.net
Sent: Tuesday, July 31, 2012 11:41 AM
Subject: Re: [Dhis2-users] reporting rate summary options in 2.9
Yup. We can put it back if it is critical.
In case you are not aware of it… Another way of doing what you say is
to set up the compulsory data elements. Click on the “edit compulsory
data elements” and set those data elements who will always have data.
Then the reporting rates will be based on the number of data sets
where those data elements have data (when selecting that option in
reporting rate viewer).
Thanks, Lars. That makes sense. I was using it as a way to see if some reporting went on even if they didn’t click the registration button.
Tom
-----Original Message-----
From: Lars Helge Øverland [mailto:larshelge@gmail.com]
Sent: 31 July 2012 17:02
To: Hiatt, Mr Tom (WPRO)
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] reporting rate summary options in 2.9
Hi Tom,
sorry about that. The reason for removing it is that we recommend
people not to store zero values and rather rely on completeness
registrations and compulsory data elements to measure reporting rates.
Then this option would give very low scores and caused a lot of
questions.
Just curious: in 2.9 was the option in reporting rate summary to select
“Based on number of registered data values” supposed to be dropped? I found
it useful.
Tom
This message was scanned for viruses with Trend Micro ScanMail, GFI
MailSecurity and GFI MailEssentials by the World Health Organization
Regional Office for the Western Pacific. However, the recipient is advised
to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named
recipients only and is confidential. It may also be privileged or otherwise
protected by law.
If you have received it in error, please notify the sender immediately by
reply e-mail and delete it and any attachments from your system. You may not
copy or disclose its contents to anyone.
====================================================
This message was scanned for viruses with Trend Micro ScanMail, GFI MailSecurity and GFI MailEssentials by the World Health Organization Regional Office for the Western Pacific. However, the recipient is advised to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named recipients only and is confidential. It may also be privileged or otherwise protected by law.
If you have received it in error, please notify the sender immediately by reply e-mail and delete it and any attachments from your system. You may not copy or disclose its contents to anyone.
I think this is completely up to yourself and how the data set is designed..
Lars
···
On Tue, Jul 31, 2012 at 3:39 PM, Muhire Andrew <muhireandrew@yahoo.com> wrote:
Thanks all for your great views, dear Lars, related to the compulsary data
element, if may be you have one dataset and you find all data elements are
compulsary can it make sense to make them all compulsary?? completeness rate
wil be based on all data elements??
________________________________
Muhire Andrew
HMIS/Ministry of Health
First say to yourself what you would be; and then do what you have to do..
----- Original Message -----
From: Lars Helge Øverland <larshelge@gmail.com>
To: hiattt@wpro.who.int
Cc: dhis2-users@lists.launchpad.net
Sent: Tuesday, July 31, 2012 11:41 AM
Subject: Re: [Dhis2-users] reporting rate summary options in 2.9
Yup. We can put it back if it is critical.
In case you are not aware of it.. Another way of doing what you say is
to set up the compulsory data elements. Click on the "edit compulsory
data elements" and set those data elements who will always have data.
Then the reporting rates will be based on the number of data sets
where those data elements have data (when selecting that option in
reporting rate viewer).
On Tue, Jul 31, 2012 at 11:28 AM, <hiattt@wpro.who.int> wrote:
Thanks, Lars. That makes sense. I was using it as a way to see if some
reporting went on even if they didn't click the registration button.
Tom
-----Original Message-----
From: Lars Helge Øverland [mailto:larshelge@gmail.com]
Sent: 31 July 2012 17:02
To: Hiatt, Mr Tom (WPRO)
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] reporting rate summary options in 2.9
Hi Tom,
sorry about that. The reason for removing it is that we recommend
people not to store zero values and rather rely on completeness
registrations and compulsory data elements to measure reporting rates.
Then this option would give very low scores and caused a lot of
questions.
regards, Lars
On Tue, Jul 31, 2012 at 9:35 AM, <hiattt@wpro.who.int> wrote:
Just curious: in 2.9 was the option in reporting rate summary to select
"Based on number of registered data values" supposed to be dropped? I
found
it useful.
Tom
________________________________
This message was scanned for viruses with Trend Micro ScanMail, GFI
MailSecurity and GFI MailEssentials by the World Health Organization
Regional Office for the Western Pacific. However, the recipient is
advised
to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named
recipients only and is confidential. It may also be privileged or
otherwise
protected by law.
If you have received it in error, please notify the sender immediately by
reply e-mail and delete it and any attachments from your system. You may
not
copy or disclose its contents to anyone.
====================================================
This message was scanned for viruses with Trend Micro ScanMail, GFI
MailSecurity and GFI MailEssentials by the World Health Organization
Regional Office for the Western Pacific. However, the recipient is advised
to scan this e-mail and any attached files for viruses.
Disclaimer:
This e-mail, together with any attachments, is intended for the named
recipients only and is confidential. It may also be privileged or otherwise
protected by law.
If you have received it in error, please notify the sender immediately by
reply e-mail and delete it and any attachments from your system. You may not
copy or disclose its contents to anyone.