Dear All,
Is it possible to have a mix of drop down menus and radio buttons inside a data entry form.
What I have observed is they are automatically displayed as drop down menus when number of options in option set increases.
There is an option to make all options to appear as drop down or radio boxes under programme settings, but is it possible to customize individually.
Thank you
–
Pamod Amarakoon
Hi,
Not sure which module you are referring here. However, the way the setting works is - if you have an optionset with more than 7 options, the display turns to drop down. For those less than 7 it should remain radio.
Thank you,
Abyot.
(sent from mobile)
On Oct 27, 2014 9:03 AM, “Pamod Amarakoon” pamodm@gmail.com wrote:
Dear All,
Is it possible to have a mix of drop down menus and radio buttons inside a data entry form.
What I have observed is they are automatically displayed as drop down menus when number of options in option set increases.
There is an option to make all options to appear as drop down or radio boxes under programme settings, but is it possible to customize individually.
Thank you
–
Pamod Amarakoon
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
Hi,
Thanx for the reply.
This is regarding a custom data entry form for a patient tracker in a single event with registration. We want to have radio buttons for certain option sets which have more than 7 options. is it possble to do this, without globally having radio buttons for all option sets.
On Mon, Oct 27, 2014 at 2:17 PM, Abyot Gizaw abyota@gmail.com wrote:
Hi,
Not sure which module you are referring here. However, the way the setting works is - if you have an optionset with more than 7 options, the display turns to drop down. For those less than 7 it should remain radio.
Thank you,
Abyot.
(sent from mobile)
On Oct 27, 2014 9:03 AM, “Pamod Amarakoon” pamodm@gmail.com wrote:
Dear All,
Is it possible to have a mix of drop down menus and radio buttons inside a data entry form.
What I have observed is they are automatically displayed as drop down menus when number of options in option set increases.
There is an option to make all options to appear as drop down or radio boxes under programme settings, but is it possible to customize individually.
Thank you
–
Pamod Amarakoon
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
–
Pamod
No, that is not possible at the moment. The setting we have is per program not per dataelement/attribute.
Thank you,
Abyot.
On Mon, Oct 27, 2014 at 9:55 AM, Pamod Amarakoon pamodm@gmail.com wrote:
Hi,
Thanx for the reply.
This is regarding a custom data entry form for a patient tracker in a single event with registration. We want to have radio buttons for certain option sets which have more than 7 options. is it possble to do this, without globally having radio buttons for all option sets.
On Mon, Oct 27, 2014 at 2:17 PM, Abyot Gizaw abyota@gmail.com wrote:
Hi,
Not sure which module you are referring here. However, the way the setting works is - if you have an optionset with more than 7 options, the display turns to drop down. For those less than 7 it should remain radio.
Thank you,
Abyot.
(sent from mobile)
On Oct 27, 2014 9:03 AM, “Pamod Amarakoon” pamodm@gmail.com wrote:
Dear All,
Is it possible to have a mix of drop down menus and radio buttons inside a data entry form.
What I have observed is they are automatically displayed as drop down menus when number of options in option set increases.
There is an option to make all options to appear as drop down or radio boxes under programme settings, but is it possible to customize individually.
Thank you
–
Pamod Amarakoon
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
–
Pamod
Hi Abyot,
Thank you for the reply. Hope this will be taken into consideration in future releases.
Regards,
Pamod
On Mon, Oct 27, 2014 at 2:46 PM, Abyot Gizaw abyota@gmail.com wrote:
No, that is not possible at the moment. The setting we have is per program not per dataelement/attribute.
–
Pamod
Thank you,
Abyot.
On Mon, Oct 27, 2014 at 9:55 AM, Pamod Amarakoon pamodm@gmail.com wrote:
Hi,
Thanx for the reply.
This is regarding a custom data entry form for a patient tracker in a single event with registration. We want to have radio buttons for certain option sets which have more than 7 options. is it possble to do this, without globally having radio buttons for all option sets.
On Mon, Oct 27, 2014 at 2:17 PM, Abyot Gizaw abyota@gmail.com wrote:
Hi,
Not sure which module you are referring here. However, the way the setting works is - if you have an optionset with more than 7 options, the display turns to drop down. For those less than 7 it should remain radio.
Thank you,
Abyot.
(sent from mobile)
On Oct 27, 2014 9:03 AM, “Pamod Amarakoon” pamodm@gmail.com wrote:
Dear All,
Is it possible to have a mix of drop down menus and radio buttons inside a data entry form.
What I have observed is they are automatically displayed as drop down menus when number of options in option set increases.
There is an option to make all options to appear as drop down or radio boxes under programme settings, but is it possible to customize individually.
Thank you
–
Pamod Amarakoon
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
–
Pamod
Yes, I think it makes sense - we will discuss about it.
We thought more than 7 will kind of clutter the form, but if users want to have it then we leave the decision for them.
Thank you,
Abyot.
On Mon, Oct 27, 2014 at 10:37 AM, Pamod Amarakoon pamodm@gmail.com wrote:
Hi Abyot,
Thank you for the reply. Hope this will be taken into consideration in future releases.
Regards,
Pamod
On Mon, Oct 27, 2014 at 2:46 PM, Abyot Gizaw abyota@gmail.com wrote:
No, that is not possible at the moment. The setting we have is per program not per dataelement/attribute.
–
Pamod
Thank you,
Abyot.
On Mon, Oct 27, 2014 at 9:55 AM, Pamod Amarakoon pamodm@gmail.com wrote:
Hi,
Thanx for the reply.
This is regarding a custom data entry form for a patient tracker in a single event with registration. We want to have radio buttons for certain option sets which have more than 7 options. is it possble to do this, without globally having radio buttons for all option sets.
On Mon, Oct 27, 2014 at 2:17 PM, Abyot Gizaw abyota@gmail.com wrote:
Hi,
Not sure which module you are referring here. However, the way the setting works is - if you have an optionset with more than 7 options, the display turns to drop down. For those less than 7 it should remain radio.
Thank you,
Abyot.
(sent from mobile)
On Oct 27, 2014 9:03 AM, “Pamod Amarakoon” pamodm@gmail.com wrote:
Dear All,
Is it possible to have a mix of drop down menus and radio buttons inside a data entry form.
What I have observed is they are automatically displayed as drop down menus when number of options in option set increases.
There is an option to make all options to appear as drop down or radio boxes under programme settings, but is it possible to customize individually.
Thank you
–
Pamod Amarakoon
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
–
Pamod
yes, In Sri Lanka, some programmes they prefer to have radio buttons only. we are facing this issue in one instance we are planing to deploy DHIS2.
And thanx for considering this
Regards,
Pamod
On Mon, Oct 27, 2014 at 3:15 PM, Abyot Gizaw abyota@gmail.com wrote:
Yes, I think it makes sense - we will discuss about it.
We thought more than 7 will kind of clutter the form, but if users want to have it then we leave the decision for them.
–
Pamod
Thank you,
Abyot.
On Mon, Oct 27, 2014 at 10:37 AM, Pamod Amarakoon pamodm@gmail.com wrote:
Hi Abyot,
Thank you for the reply. Hope this will be taken into consideration in future releases.
Regards,
Pamod
On Mon, Oct 27, 2014 at 2:46 PM, Abyot Gizaw abyota@gmail.com wrote:
No, that is not possible at the moment. The setting we have is per program not per dataelement/attribute.
–
Pamod
Thank you,
Abyot.
On Mon, Oct 27, 2014 at 9:55 AM, Pamod Amarakoon pamodm@gmail.com wrote:
Hi,
Thanx for the reply.
This is regarding a custom data entry form for a patient tracker in a single event with registration. We want to have radio buttons for certain option sets which have more than 7 options. is it possble to do this, without globally having radio buttons for all option sets.
On Mon, Oct 27, 2014 at 2:17 PM, Abyot Gizaw abyota@gmail.com wrote:
Hi,
Not sure which module you are referring here. However, the way the setting works is - if you have an optionset with more than 7 options, the display turns to drop down. For those less than 7 it should remain radio.
Thank you,
Abyot.
(sent from mobile)
On Oct 27, 2014 9:03 AM, “Pamod Amarakoon” pamodm@gmail.com wrote:
Dear All,
Is it possible to have a mix of drop down menus and radio buttons inside a data entry form.
What I have observed is they are automatically displayed as drop down menus when number of options in option set increases.
There is an option to make all options to appear as drop down or radio boxes under programme settings, but is it possible to customize individually.
Thank you
–
Pamod Amarakoon
Mailing list: https://launchpad.net/~dhis2-devs
Post to : dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs
More help : https://help.launchpad.net/ListHelp
–
Pamod