Events not getting auto-generated

Hi everyone,

I am creating a program for tracking the PNC visits in the lines of
"​

MNCH / PNC (Adult Woman)
​"​ Program configured in the Sierra Leon Demo system.

In my case I have created multiple PNC visits such as PNC 1, PNC2, PNC3 that would occur at 1,3,5 days after the delivery date which is the incident date of the program.

I would like these events to be auto-generated at scheduled days, so that I can generate overdue reports for the health workers to act upon. However, I cannot get this working, despite doing all the configurations(Listed down below). Even after the required number of days, I can’t see the overdue events are being generated for the patients, nor can I see them listed in the events overdue reports.

In the program stage configuration for each stages :

“Scheduled days from start” was given a valid value.

“Auto-generate event” was ticked on.

Have I missed any configuration? I am using version 2.23.

Please help.

Thanks,

Arun Paul.

Dear Arun,

Is delivery date your incident date?

You must have an incident date or use enrollment date for the auto generate events to work.

Regards

···

On Sat, Nov 12, 2016 at 3:22 PM, Arun Paul paul.arun@gmail.com wrote:

Hi everyone,

I am creating a program for tracking the PNC visits in the lines of
"​

MNCH / PNC (Adult Woman)
​"​ Program configured in the Sierra Leon Demo system.

In my case I have created multiple PNC visits such as PNC 1, PNC2, PNC3 that would occur at 1,3,5 days after the delivery date which is the incident date of the program.

I would like these events to be auto-generated at scheduled days, so that I can generate overdue reports for the health workers to act upon. However, I cannot get this working, despite doing all the configurations(Listed down below). Even after the required number of days, I can’t see the overdue events are being generated for the patients, nor can I see them listed in the events overdue reports.

In the program stage configuration for each stages :

“Scheduled days from start” was given a valid value.

“Auto-generate event” was ticked on.

Have I missed any configuration? I am using version 2.23.

Please help.

Thanks,

Arun Paul.


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

Thanks Prosper.

Yes I set the incident date as the delivery date but it does not help.

Is there anything else I have to check?

Regards,

Arun

···

On Mon, Nov 14, 2016 at 1:09 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Arun,

Is delivery date your incident date?

You must have an incident date or use enrollment date for the auto generate events to work.

Regards

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Sat, Nov 12, 2016 at 3:22 PM, Arun Paul paul.arun@gmail.com wrote:

Hi everyone,

I am creating a program for tracking the PNC visits in the lines of
"​

MNCH / PNC (Adult Woman)
​"​ Program configured in the Sierra Leon Demo system.

In my case I have created multiple PNC visits such as PNC 1, PNC2, PNC3 that would occur at 1,3,5 days after the delivery date which is the incident date of the program.

I would like these events to be auto-generated at scheduled days, so that I can generate overdue reports for the health workers to act upon. However, I cannot get this working, despite doing all the configurations(Listed down below). Even after the required number of days, I can’t see the overdue events are being generated for the patients, nor can I see them listed in the events overdue reports.

In the program stage configuration for each stages :

“Scheduled days from start” was given a valid value.

“Auto-generate event” was ticked on.

Have I missed any configuration? I am using version 2.23.

Please help.

Thanks,

Arun Paul.


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Arun,

It works fine in our demo server - which is 2.25. I don’t remember any big change in that area between 2.23 and 2.25.

Can you share us some screenshots? Also, do you see anything in red under your browser console?

···

On Mon, Nov 14, 2016 at 6:11 AM, Arun Paul paul.arun@gmail.com wrote:

Thanks Prosper.

Yes I set the incident date as the delivery date but it does not help.

Is there anything else I have to check?

Regards,

Arun


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Mon, Nov 14, 2016 at 1:09 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Arun,

Is delivery date your incident date?

You must have an incident date or use enrollment date for the auto generate events to work.

Regards

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Sat, Nov 12, 2016 at 3:22 PM, Arun Paul paul.arun@gmail.com wrote:

Hi everyone,

I am creating a program for tracking the PNC visits in the lines of
"​

MNCH / PNC (Adult Woman)
​"​ Program configured in the Sierra Leon Demo system.

In my case I have created multiple PNC visits such as PNC 1, PNC2, PNC3 that would occur at 1,3,5 days after the delivery date which is the incident date of the program.

I would like these events to be auto-generated at scheduled days, so that I can generate overdue reports for the health workers to act upon. However, I cannot get this working, despite doing all the configurations(Listed down below). Even after the required number of days, I can’t see the overdue events are being generated for the patients, nor can I see them listed in the events overdue reports.

In the program stage configuration for each stages :

“Scheduled days from start” was given a valid value.

“Auto-generate event” was ticked on.

Have I missed any configuration? I am using version 2.23.

Please help.

Thanks,

Arun Paul.


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Abyot,

This issue is still not resolved. I am attaching the screenshots here.

I could not find anything error-like on the browser console too. I have attached the both the screenshots, just after enrolling to the program and just after manually generating the stage1 event.

Let me know if you find anything.

Thanks in advance.

···

On Mon, Nov 14, 2016 at 12:25 PM, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Arun,

It works fine in our demo server - which is 2.25. I don’t remember any big change in that area between 2.23 and 2.25.

Can you share us some screenshots? Also, do you see anything in red under your browser console?

  • Arun Paul

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Mon, Nov 14, 2016 at 6:11 AM, Arun Paul paul.arun@gmail.com wrote:

Thanks Prosper.

Yes I set the incident date as the delivery date but it does not help.

Is there anything else I have to check?

Regards,

Arun


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

On Mon, Nov 14, 2016 at 1:09 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Arun,

Is delivery date your incident date?

You must have an incident date or use enrollment date for the auto generate events to work.

Regards

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Sat, Nov 12, 2016 at 3:22 PM, Arun Paul paul.arun@gmail.com wrote:

Hi everyone,

I am creating a program for tracking the PNC visits in the lines of
"​

MNCH / PNC (Adult Woman)
​"​ Program configured in the Sierra Leon Demo system.

In my case I have created multiple PNC visits such as PNC 1, PNC2, PNC3 that would occur at 1,3,5 days after the delivery date which is the incident date of the program.

I would like these events to be auto-generated at scheduled days, so that I can generate overdue reports for the health workers to act upon. However, I cannot get this working, despite doing all the configurations(Listed down below). Even after the required number of days, I can’t see the overdue events are being generated for the patients, nor can I see them listed in the events overdue reports.

In the program stage configuration for each stages :

“Scheduled days from start” was given a valid value.

“Auto-generate event” was ticked on.

Have I missed any configuration? I am using version 2.23.

Please help.

Thanks,

Arun Paul.


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

May be the meta data is changed after the app has run… if this is the case, the solution is to fully clear your browser cache and run the app again.

···

On Nov 16, 2016 03:39, “Arun Paul” paul.arun@gmail.com wrote:

Hi Abyot,

This issue is still not resolved. I am attaching the screenshots here.

I could not find anything error-like on the browser console too. I have attached the both the screenshots, just after enrolling to the program and just after manually generating the stage1 event.

Let me know if you find anything.

Thanks in advance.

  • Arun Paul

On Mon, Nov 14, 2016 at 12:25 PM, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Arun,

It works fine in our demo server - which is 2.25. I don’t remember any big change in that area between 2.23 and 2.25.

Can you share us some screenshots? Also, do you see anything in red under your browser console?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Mon, Nov 14, 2016 at 6:11 AM, Arun Paul paul.arun@gmail.com wrote:

Thanks Prosper.

Yes I set the incident date as the delivery date but it does not help.

Is there anything else I have to check?

Regards,

Arun


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

On Mon, Nov 14, 2016 at 1:09 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Arun,

Is delivery date your incident date?

You must have an incident date or use enrollment date for the auto generate events to work.

Regards

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Sat, Nov 12, 2016 at 3:22 PM, Arun Paul paul.arun@gmail.com wrote:

Hi everyone,

I am creating a program for tracking the PNC visits in the lines of
"​

MNCH / PNC (Adult Woman)
​"​ Program configured in the Sierra Leon Demo system.

In my case I have created multiple PNC visits such as PNC 1, PNC2, PNC3 that would occur at 1,3,5 days after the delivery date which is the incident date of the program.

I would like these events to be auto-generated at scheduled days, so that I can generate overdue reports for the health workers to act upon. However, I cannot get this working, despite doing all the configurations(Listed down below). Even after the required number of days, I can’t see the overdue events are being generated for the patients, nor can I see them listed in the events overdue reports.

In the program stage configuration for each stages :

“Scheduled days from start” was given a valid value.

“Auto-generate event” was ticked on.

Have I missed any configuration? I am using version 2.23.

Please help.

Thanks,

Arun Paul.


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Abyot,

That’s not the case. Anyway I cleaned the browser cache just to be double sure.

The issue is still not solved.

Any other ideas?

···

On Wed, Nov 16, 2016 at 11:19 AM, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

May be the meta data is changed after the app has run… if this is the case, the solution is to fully clear your browser cache and run the app again.


Thank you,

Abyot.

(sent from mobile)

​Thanks

,

  • Arun Paul

On Nov 16, 2016 03:39, “Arun Paul” paul.arun@gmail.com wrote:

Hi Abyot,

This issue is still not resolved. I am attaching the screenshots here.

I could not find anything error-like on the browser console too. I have attached the both the screenshots, just after enrolling to the program and just after manually generating the stage1 event.

Let me know if you find anything.

Thanks in advance.

  • Arun Paul

On Mon, Nov 14, 2016 at 12:25 PM, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Arun,

It works fine in our demo server - which is 2.25. I don’t remember any big change in that area between 2.23 and 2.25.

Can you share us some screenshots? Also, do you see anything in red under your browser console?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Mon, Nov 14, 2016 at 6:11 AM, Arun Paul paul.arun@gmail.com wrote:

Thanks Prosper.

Yes I set the incident date as the delivery date but it does not help.

Is there anything else I have to check?

Regards,

Arun


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

On Mon, Nov 14, 2016 at 1:09 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Arun,

Is delivery date your incident date?

You must have an incident date or use enrollment date for the auto generate events to work.

Regards

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Sat, Nov 12, 2016 at 3:22 PM, Arun Paul paul.arun@gmail.com wrote:

Hi everyone,

I am creating a program for tracking the PNC visits in the lines of
"​

MNCH / PNC (Adult Woman)
​"​ Program configured in the Sierra Leon Demo system.

In my case I have created multiple PNC visits such as PNC 1, PNC2, PNC3 that would occur at 1,3,5 days after the delivery date which is the incident date of the program.

I would like these events to be auto-generated at scheduled days, so that I can generate overdue reports for the health workers to act upon. However, I cannot get this working, despite doing all the configurations(Listed down below). Even after the required number of days, I can’t see the overdue events are being generated for the patients, nor can I see them listed in the events overdue reports.

In the program stage configuration for each stages :

“Scheduled days from start” was given a valid value.

“Auto-generate event” was ticked on.

Have I missed any configuration? I am using version 2.23.

Please help.

Thanks,

Arun Paul.


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Is it possible to access your system so that I can take a close look? or share your db privately?

···

On Fri, Nov 18, 2016 at 5:58 AM, Arun Paul paul.arun@gmail.com wrote:

Hi Abyot,

That’s not the case. Anyway I cleaned the browser cache just to be double sure.

The issue is still not solved.

Any other ideas?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

​Thanks

,

  • Arun Paul

On Wed, Nov 16, 2016 at 11:19 AM, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

May be the meta data is changed after the app has run… if this is the case, the solution is to fully clear your browser cache and run the app again.


Thank you,

Abyot.

(sent from mobile)

On Nov 16, 2016 03:39, “Arun Paul” paul.arun@gmail.com wrote:

Hi Abyot,

This issue is still not resolved. I am attaching the screenshots here.

I could not find anything error-like on the browser console too. I have attached the both the screenshots, just after enrolling to the program and just after manually generating the stage1 event.

Let me know if you find anything.

Thanks in advance.

  • Arun Paul

On Mon, Nov 14, 2016 at 12:25 PM, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Arun,

It works fine in our demo server - which is 2.25. I don’t remember any big change in that area between 2.23 and 2.25.

Can you share us some screenshots? Also, do you see anything in red under your browser console?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Mon, Nov 14, 2016 at 6:11 AM, Arun Paul paul.arun@gmail.com wrote:

Thanks Prosper.

Yes I set the incident date as the delivery date but it does not help.

Is there anything else I have to check?

Regards,

Arun


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

On Mon, Nov 14, 2016 at 1:09 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Arun,

Is delivery date your incident date?

You must have an incident date or use enrollment date for the auto generate events to work.

Regards

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Sat, Nov 12, 2016 at 3:22 PM, Arun Paul paul.arun@gmail.com wrote:

Hi everyone,

I am creating a program for tracking the PNC visits in the lines of
"​

MNCH / PNC (Adult Woman)
​"​ Program configured in the Sierra Leon Demo system.

In my case I have created multiple PNC visits such as PNC 1, PNC2, PNC3 that would occur at 1,3,5 days after the delivery date which is the incident date of the program.

I would like these events to be auto-generated at scheduled days, so that I can generate overdue reports for the health workers to act upon. However, I cannot get this working, despite doing all the configurations(Listed down below). Even after the required number of days, I can’t see the overdue events are being generated for the patients, nor can I see them listed in the events overdue reports.

In the program stage configuration for each stages :

“Scheduled days from start” was given a valid value.

“Auto-generate event” was ticked on.

Have I missed any configuration? I am using version 2.23.

Please help.

Thanks,

Arun Paul.


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Arun,

There happens to be a bug when auto generating event. It is fixed from master (2.26) all the way to 2.23.

Thank you for reporting.

···

On Fri, Nov 18, 2016 at 9:07 AM, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Is it possible to access your system so that I can take a close look? or share your db privately?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Nov 18, 2016 at 5:58 AM, Arun Paul paul.arun@gmail.com wrote:

Hi Abyot,

That’s not the case. Anyway I cleaned the browser cache just to be double sure.

The issue is still not solved.

Any other ideas?

​Thanks

,

  • Arun Paul

On Wed, Nov 16, 2016 at 11:19 AM, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

May be the meta data is changed after the app has run… if this is the case, the solution is to fully clear your browser cache and run the app again.


Thank you,

Abyot.

(sent from mobile)

On Nov 16, 2016 03:39, “Arun Paul” paul.arun@gmail.com wrote:

Hi Abyot,

This issue is still not resolved. I am attaching the screenshots here.

I could not find anything error-like on the browser console too. I have attached the both the screenshots, just after enrolling to the program and just after manually generating the stage1 event.

Let me know if you find anything.

Thanks in advance.

  • Arun Paul

On Mon, Nov 14, 2016 at 12:25 PM, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Arun,

It works fine in our demo server - which is 2.25. I don’t remember any big change in that area between 2.23 and 2.25.

Can you share us some screenshots? Also, do you see anything in red under your browser console?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Mon, Nov 14, 2016 at 6:11 AM, Arun Paul paul.arun@gmail.com wrote:

Thanks Prosper.

Yes I set the incident date as the delivery date but it does not help.

Is there anything else I have to check?

Regards,

Arun


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

On Mon, Nov 14, 2016 at 1:09 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Arun,

Is delivery date your incident date?

You must have an incident date or use enrollment date for the auto generate events to work.

Regards

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Sat, Nov 12, 2016 at 3:22 PM, Arun Paul paul.arun@gmail.com wrote:

Hi everyone,

I am creating a program for tracking the PNC visits in the lines of
"​

MNCH / PNC (Adult Woman)
​"​ Program configured in the Sierra Leon Demo system.

In my case I have created multiple PNC visits such as PNC 1, PNC2, PNC3 that would occur at 1,3,5 days after the delivery date which is the incident date of the program.

I would like these events to be auto-generated at scheduled days, so that I can generate overdue reports for the health workers to act upon. However, I cannot get this working, despite doing all the configurations(Listed down below). Even after the required number of days, I can’t see the overdue events are being generated for the patients, nor can I see them listed in the events overdue reports.

In the program stage configuration for each stages :

“Scheduled days from start” was given a valid value.

“Auto-generate event” was ticked on.

Have I missed any configuration? I am using version 2.23.

Please help.

Thanks,

Arun Paul.


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp