Event capture loading meta-data takes a long time

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:image

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…

image

···

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

Hi Morten,

I tried that and it also did not work. What other possible cause beside the cache?

Thank you.

image

···

On 6 January 2017 at 12:47, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…

Karin.

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards

image

···

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Karina,

Are you using 2.21?

Also, how was your metadata created - did you use some import/export? It seems you have a program without a program stage. Can you check that?

image

···

On Fri, Jan 6, 2017 at 6:57 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Hi Abyot,

I am using 2.21 (build revision 21070), sorry I did not mention that earlier.

Yes this is a program without registration and program stage. This is a one time survey data, so I don’t think stage is needed. For the metadata, I added manually on Programs/Attributes menu. It worked perfectly until I tried to delete one of unused program, I don’t know what went wrong. Any ideas?

Prosper, thank you for the suggestion. I will try that.

image

···

On 6 January 2017 at 13:11, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Karina,

Are you using 2.21?

Also, how was your metadata created - did you use some import/export? It seems you have a program without a program stage. Can you check that?


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Karin.

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 6:57 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

You need to have a stage with dataelements assigned to it … otherwise what will you be collecting?

image

···

On Fri, Jan 6, 2017 at 10:26 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi Abyot,

I am using 2.21 (build revision 21070), sorry I did not mention that earlier.

Yes this is a program without registration and program stage. This is a one time survey data, so I don’t think stage is needed. For the metadata, I added manually on Programs/Attributes menu. It worked perfectly until I tried to delete one of unused program, I don’t know what went wrong. Any ideas?

Prosper, thank you for the suggestion. I will try that.

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

Karin.

On 6 January 2017 at 13:11, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Karina,

Are you using 2.21?

Also, how was your metadata created - did you use some import/export? It seems you have a program without a program stage. Can you check that?


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 6:57 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

I am sorry, I was looking at the wrong place. I have one stage with some data elements assign to it, but haven’t set the indicators and rules yet.
Attached is the exported data that I have input manually before the problem happen.

events (3).csv (87.8 KB)

···

On 6 January 2017 at 17:13, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

You need to have a stage with dataelements assigned to it … otherwise what will you be collecting?

Karin.

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 10:26 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi Abyot,

I am using 2.21 (build revision 21070), sorry I did not mention that earlier.

Yes this is a program without registration and program stage. This is a one time survey data, so I don’t think stage is needed. For the metadata, I added manually on Programs/Attributes menu. It worked perfectly until I tried to delete one of unused program, I don’t know what went wrong. Any ideas?

Prosper, thank you for the suggestion. I will try that.

Karin.

On 6 January 2017 at 13:11, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Karina,

Are you using 2.21?

Also, how was your metadata created - did you use some import/export? It seems you have a program without a program stage. Can you check that?


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 6:57 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

What do you get when running the following?

http://localhost:8080/dhis/api/programs.json?filter=programType:eq:WITHOUT_REGISTRATION&paging=false&fields=id,name,version,categoryCombo[id,isDefault,categories[id,categoryOptions[id]]],programStages[id,version,programStageSections[id],programStageDataElements[dataElement[id,optionSet[id,version]]]]

image

···

On Fri, Jan 6, 2017 at 11:45 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

I am sorry, I was looking at the wrong place. I have one stage with some data elements assign to it, but haven’t set the indicators and rules yet.
Attached is the exported data that I have input manually before the problem happen.

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

Karin.

On 6 January 2017 at 17:13, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

You need to have a stage with dataelements assigned to it … otherwise what will you be collecting?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 10:26 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi Abyot,

I am using 2.21 (build revision 21070), sorry I did not mention that earlier.

Yes this is a program without registration and program stage. This is a one time survey data, so I don’t think stage is needed. For the metadata, I added manually on Programs/Attributes menu. It worked perfectly until I tried to delete one of unused program, I don’t know what went wrong. Any ideas?

Prosper, thank you for the suggestion. I will try that.

Karin.

On 6 January 2017 at 13:11, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Karina,

Are you using 2.21?

Also, how was your metadata created - did you use some import/export? It seems you have a program without a program stage. Can you check that?


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 6:57 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

I got this, not sure what this mean. Should it look like this?

image

image

···

On 6 January 2017 at 17:59, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

What do you get when running the following?

http://localhost:8080/dhis/api/programs.json?filter=programType:eq:WITHOUT_REGISTRATION&paging=false&fields=id,name,version,categoryCombo[id,isDefault,categories[id,categoryOptions[id]]],programStages[id,version,programStageSections[id],programStageDataElements[dataElement[id,optionSet[id,version]]]]

Karin.

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 11:45 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

I am sorry, I was looking at the wrong place. I have one stage with some data elements assign to it, but haven’t set the indicators and rules yet.
Attached is the exported data that I have input manually before the problem happen.

Karin.

On 6 January 2017 at 17:13, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

You need to have a stage with dataelements assigned to it … otherwise what will you be collecting?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 10:26 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi Abyot,

I am using 2.21 (build revision 21070), sorry I did not mention that earlier.

Yes this is a program without registration and program stage. This is a one time survey data, so I don’t think stage is needed. For the metadata, I added manually on Programs/Attributes menu. It worked perfectly until I tried to delete one of unused program, I don’t know what went wrong. Any ideas?

Prosper, thank you for the suggestion. I will try that.

Karin.

On 6 January 2017 at 13:11, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Karina,

Are you using 2.21?

Also, how was your metadata created - did you use some import/export? It seems you have a program without a program stage. Can you check that?


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 6:57 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

You have two programs

  • Mass Blood Survey with stage

  • MBS_2 without stage

Can you assign MBS_2 a stage or remove it if you don’t need it?

image

image

···

On Fri, Jan 6, 2017 at 12:09 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

I got this, not sure what this mean. Should it look like this?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

Karin.

On 6 January 2017 at 17:59, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

What do you get when running the following?

http://localhost:8080/dhis/api/programs.json?filter=programType:eq:WITHOUT_REGISTRATION&paging=false&fields=id,name,version,categoryCombo[id,isDefault,categories[id,categoryOptions[id]]],programStages[id,version,programStageSections[id],programStageDataElements[dataElement[id,optionSet[id,version]]]]

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 11:45 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

I am sorry, I was looking at the wrong place. I have one stage with some data elements assign to it, but haven’t set the indicators and rules yet.
Attached is the exported data that I have input manually before the problem happen.

Karin.

On 6 January 2017 at 17:13, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

You need to have a stage with dataelements assigned to it … otherwise what will you be collecting?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 10:26 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi Abyot,

I am using 2.21 (build revision 21070), sorry I did not mention that earlier.

Yes this is a program without registration and program stage. This is a one time survey data, so I don’t think stage is needed. For the metadata, I added manually on Programs/Attributes menu. It worked perfectly until I tried to delete one of unused program, I don’t know what went wrong. Any ideas?

Prosper, thank you for the suggestion. I will try that.

Karin.

On 6 January 2017 at 13:11, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Karina,

Are you using 2.21?

Also, how was your metadata created - did you use some import/export? It seems you have a program without a program stage. Can you check that?


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 6:57 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

I can not remove MBS_2. It just look like this

image

I also can not add any program stage, because there is no ‘add new’ button’. It should be there, right?

image

This exactly what I’ve tried to do before. The deleting process took a long time so I refreshed the page, after that I can not input any data via event capture because the meta-data just keep loading. Any idea why this happen?

Thank you.

image

image

···

On 6 January 2017 at 18:20, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

You have two programs

  • Mass Blood Survey with stage
  • MBS_2 without stage

Can you assign MBS_2 a stage or remove it if you don’t need it?

Karin.

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:09 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

I got this, not sure what this mean. Should it look like this?

Karin.

On 6 January 2017 at 17:59, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

What do you get when running the following?

http://localhost:8080/dhis/api/programs.json?filter=programType:eq:WITHOUT_REGISTRATION&paging=false&fields=id,name,version,categoryCombo[id,isDefault,categories[id,categoryOptions[id]]],programStages[id,version,programStageSections[id],programStageDataElements[dataElement[id,optionSet[id,version]]]]

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 11:45 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

I am sorry, I was looking at the wrong place. I have one stage with some data elements assign to it, but haven’t set the indicators and rules yet.
Attached is the exported data that I have input manually before the problem happen.

Karin.

On 6 January 2017 at 17:13, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

You need to have a stage with dataelements assigned to it … otherwise what will you be collecting?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 10:26 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi Abyot,

I am using 2.21 (build revision 21070), sorry I did not mention that earlier.

Yes this is a program without registration and program stage. This is a one time survey data, so I don’t think stage is needed. For the metadata, I added manually on Programs/Attributes menu. It worked perfectly until I tried to delete one of unused program, I don’t know what went wrong. Any ideas?

Prosper, thank you for the suggestion. I will try that.

Karin.

On 6 January 2017 at 13:11, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Karina,

Are you using 2.21?

Also, how was your metadata created - did you use some import/export? It seems you have a program without a program stage. Can you check that?


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 6:57 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Ok, I have made a small fix which hopefully will allow you to continue. Download the latest 2.21 or if you can better to upgrade to latest versions of DHIS2.

Re: the program - you sill need to fix the issue with program MBS_2. Not sure how you end up like that, normally the stage is created automatically. Anyways, try to delete it one more time, check your tomcat log and see what the problem is. You can also try to delete it manually using sql stmts.

image

image

image

image

···

On Mon, Jan 9, 2017 at 1:57 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

I can not remove MBS_2. It just look like this

I also can not add any program stage, because there is no ‘add new’ button’. It should be there, right?

This exactly what I’ve tried to do before. The deleting process took a long time so I refreshed the page, after that I can not input any data via event capture because the meta-data just keep loading. Any idea why this happen?

Thank you.

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

Karin.

On 6 January 2017 at 18:20, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

You have two programs

  • Mass Blood Survey with stage
  • MBS_2 without stage

Can you assign MBS_2 a stage or remove it if you don’t need it?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:09 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

I got this, not sure what this mean. Should it look like this?

Karin.

On 6 January 2017 at 17:59, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

What do you get when running the following?

http://localhost:8080/dhis/api/programs.json?filter=programType:eq:WITHOUT_REGISTRATION&paging=false&fields=id,name,version,categoryCombo[id,isDefault,categories[id,categoryOptions[id]]],programStages[id,version,programStageSections[id],programStageDataElements[dataElement[id,optionSet[id,version]]]]

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 11:45 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

I am sorry, I was looking at the wrong place. I have one stage with some data elements assign to it, but haven’t set the indicators and rules yet.
Attached is the exported data that I have input manually before the problem happen.

Karin.

On 6 January 2017 at 17:13, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

You need to have a stage with dataelements assigned to it … otherwise what will you be collecting?

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 10:26 AM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi Abyot,

I am using 2.21 (build revision 21070), sorry I did not mention that earlier.

Yes this is a program without registration and program stage. This is a one time survey data, so I don’t think stage is needed. For the metadata, I added manually on Programs/Attributes menu. It worked perfectly until I tried to delete one of unused program, I don’t know what went wrong. Any ideas?

Prosper, thank you for the suggestion. I will try that.

Karin.

On 6 January 2017 at 13:11, Abyot Asalefew Gizaw abyot@dhis2.org wrote:

Hi Karina,

Are you using 2.21?

Also, how was your metadata created - did you use some import/export? It seems you have a program without a program stage. Can you check that?


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Abyot A. Gizaw.

Senior Engineer, DHIS2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 6:57 AM, Prosper BT ptb3000@gmail.com wrote:

Dear Morten,

Been experiencing the same especially after updating to the latest build with 2.25 even when you run in incognito.

Whats strange is that when you create a new user and assign the same user roles, its able to load the tracked entity dashboard.

Karina try to create a new user and assign the exact roles and see, dont crone the old user just a fresh now one.

Regards


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Prosper Behumbiize, MPH
DHIS2 Implementation| HISP Uganda/University Of Oslo
+256 752 751 776 | +256 776 139 139

prosper@hispuganda.org | prosper@dhis2.org | Skype: prospertb

On Fri, Jan 6, 2017 at 8:47 AM, Morten Olav Hansen morten@dhis2.org wrote:

Hi Karina

Could you also try to see if it works in chrome ingocnito? Some of these caches can be hard to remove properly, but if you start up incognito… at least you can verify if its related to the cache or not…


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp

Morten Olav Hansen

Senior Engineer, DHIS 2

University of Oslo

http://www.dhis2.org

On Fri, Jan 6, 2017 at 12:44 PM, Karina Dian Lestari karinadnlstr@gmail.com wrote:

Hi all,

I have this problem about event capture. It happen after I try to remove one of my unused program on list. It takes too long so I canceled the remove process by refreshing the page. Now whenever I want to input data in event capture it look like this:

I already tried clearing caches on DHIS2 and chrome, also restarting the laptop but it still does not work.

Any solution to this?

Thank you very much.

Best regards,


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp