[Dhis2-devs] Data saving issue in report generation

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” wnthksnrth@gmail.com følgende:
···

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring knutst@gmail.com wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

regards


Mailing list: https://launchpad.net/~dhis2-devs

Post to : dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs

More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks

Awanthika

···

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring knutst@gmail.com wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” wnthksnrth@gmail.com følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring knutst@gmail.com wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

regards


Mailing list: https://launchpad.net/~dhis2-devs

Post to : dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs

More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

I don’t think there’s a bug, really have no idea what your problem is, as you have not described it very thoroughly. You could try describing the exact procedure on the online demo, but that is 2.13, which is anyway a big improvement.

To upgrade, you should not touch your database, just replace everything in webapps with the new war file.

Knut

···

On Wed, Nov 6, 2013 at 6:18 AM, awanth sen wnthksnrth@gmail.com wrote:

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks

Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring knutst@gmail.com wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” wnthksnrth@gmail.com følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring knutst@gmail.com wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

regards


Mailing list: https://launchpad.net/~dhis2-devs

Post to : dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs

More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika

···

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards

Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi

Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University

Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431

fax: +265 (01) 776 410

skype: kabango.malewezi

www.jhpiego.org<http://www.jhpiego.org/>

www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM

To: Knut Staring

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks

Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks

regards

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut

···

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards

Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi

Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University

Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431

fax: +265 (01) 776 410

skype: kabango.malewezi

www.jhpiego.org<http://www.jhpiego.org/>

www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM

To: Knut Staring

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks

Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks

regards

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

Hi all,

I have attempted everything. with no luck. even the organizational unit I created last as hospital C does not appear in the reporting view to get a report as an organization unit. to be more precise i have attached two scrreen shots of the data entry view and the report i generated.

Can someone please help me to get the data values i entered into the reports?

Thanks.

Regards
Awanthika

···

On Wed, Nov 6, 2013 at 11:02 AM, Knut Staring knutst@gmail.com wrote:

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards

Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi

Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University

Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431

fax: +265 (01) 776 410

skype: kabango.malewezi

www.jhpiego.org<http://www.jhpiego.org/>

www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM

To: Knut Staring

Cc: dhis2-users@lists.launchpad.net

Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks

Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks

regards

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp

Knut Staring

Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

Hi Awanthika,

I also find that if you have a google account and signed in, clearing your cache sometimes doesn’t work. Try signing out, clear both browser and application cache and try again. If that fails, use another computer and see if it’s the same problems you are getting. If yes, check your data integrity to see if you could spot anything there that may be causing the problem.

Best wishes,

Busoye

···

On Wed, Nov 6, 2013 at 11:02 AM, Knut Staring knutst@gmail.com wrote:

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards
Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi
Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University
Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi
tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431
fax: +265 (01) 776 410
skype: kabango.malewezi
www.jhpiego.org<http://www.jhpiego.org/>
www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]
Sent: Wednesday, November 06, 2013 7:18 AM
To: Knut Staring
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks
Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:
Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:
Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks
regards


------------------------------------------------------------------------------------------->>
AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp


Knut Staring
Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org


------------------------------------------------------------------------------------------->>
AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>
AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

Hi,

I have tried that too. now i can see all the organizational units i created. is there anything that Im not doing right here?

You have to add data elements, assign them to data sets and then assign the data set to the organizational unit.

Go to the data entry pane and add data and click on complete button. that is all i did and then ran the analytical data mart with both options ticked
analytical tables update and data mart tables update

then the added data should come to the reports when i generate reports isn’t it? Please let me know whether there is anything that Im missing here. thanks

···

On Wed, Nov 6, 2013 at 3:39 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi Awanthika,

I also find that if you have a google account and signed in, clearing your cache sometimes doesn’t work. Try signing out, clear both browser and application cache and try again. If that fails, use another computer and see if it’s the same problems you are getting. If yes, check your data integrity to see if you could spot anything there that may be causing the problem.

Best wishes,

Busoye

On 6 Nov 2013, at 14:01, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have attempted everything. with no luck. even the organizational unit I created last as hospital C does not appear in the reporting view to get a report as an organization unit. to be more precise i have attached two scrreen shots of the data entry view and the report i generated.

Can someone please help me to get the data values i entered into the reports?

Thanks.

Regards
Awanthika

<Screenshot from 2013-11-06 14:53:50.png><Screenshot from 2013-11-06 14:54:20.png>_______________________________________________

Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 11:02 AM, Knut Staring knutst@gmail.com wrote:

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards
Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi
Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University
Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431
fax: +265 (01) 776 410

skype: kabango.malewezi
www.jhpiego.org<http://www.jhpiego.org/>
www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM
To: Knut Staring
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks
Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks
regards


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp


Knut Staring
Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

Hi,

One other reason why you might not see your data in the report is if the data element Value Type is number and not text.

Best.

Busoye

···

On Wed, Nov 6, 2013 at 3:39 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi Awanthika,

I also find that if you have a google account and signed in, clearing your cache sometimes doesn’t work. Try signing out, clear both browser and application cache and try again. If that fails, use another computer and see if it’s the same problems you are getting. If yes, check your data integrity to see if you could spot anything there that may be causing the problem.

Best wishes,

Busoye

On 6 Nov 2013, at 14:01, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have attempted everything. with no luck. even the organizational unit I created last as hospital C does not appear in the reporting view to get a report as an organization unit. to be more precise i have attached two scrreen shots of the data entry view and the report i generated.

Can someone please help me to get the data values i entered into the reports?

Thanks.

Regards
Awanthika

<Screenshot from 2013-11-06 14:53:50.png><Screenshot from 2013-11-06 14:54:20.png>_______________________________________________

Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 11:02 AM, Knut Staring knutst@gmail.com wrote:

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards
Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi
Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University
Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431
fax: +265 (01) 776 410

skype: kabango.malewezi
www.jhpiego.org<http://www.jhpiego.org/>
www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM
To: Knut Staring
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks
Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks
regards


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp


Knut Staring
Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

Sorry I meant the other way round. Make sure Data element Value Type is number and not Text.

···

On Wed, Nov 6, 2013 at 3:39 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi Awanthika,

I also find that if you have a google account and signed in, clearing your cache sometimes doesn’t work. Try signing out, clear both browser and application cache and try again. If that fails, use another computer and see if it’s the same problems you are getting. If yes, check your data integrity to see if you could spot anything there that may be causing the problem.

Best wishes,

Busoye

On 6 Nov 2013, at 14:01, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have attempted everything. with no luck. even the organizational unit I created last as hospital C does not appear in the reporting view to get a report as an organization unit. to be more precise i have attached two scrreen shots of the data entry view and the report i generated.

Can someone please help me to get the data values i entered into the reports?

Thanks.

Regards
Awanthika

<Screenshot from 2013-11-06 14:53:50.png><Screenshot from 2013-11-06 14:54:20.png>_______________________________________________

Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 11:02 AM, Knut Staring knutst@gmail.com wrote:

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards
Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi
Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University
Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431
fax: +265 (01) 776 410

skype: kabango.malewezi
www.jhpiego.org<http://www.jhpiego.org/>
www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM
To: Knut Staring
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks
Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks
regards


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp


Knut Staring
Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

Yes i checked that, the data type value is indeed number. I had this in another machine before and this process worked fine for me. I must be missing some step in the process. is there anyway that i can delete all elements i created and start afresh? since i have data entry objects the system wont allow me to delete the data elements either.

thanks
awanthika

···

On Wed, Nov 6, 2013 at 5:21 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Sorry I meant the other way round. Make sure Data element Value Type is number and not Text.

On 6 Nov 2013, at 15:43, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi,

One other reason why you might not see your data in the report is if the data element Value Type is number and not text.

Best.

Busoye
On 6 Nov 2013, at 15:19, awanth sen wnthksnrth@gmail.com wrote:

Hi,

I have tried that too. now i can see all the organizational units i created. is there anything that Im not doing right here?

You have to add data elements, assign them to data sets and then assign the data set to the organizational unit.

Go to the data entry pane and add data and click on complete button. that is all i did and then ran the analytical data mart with both options ticked
analytical tables update and data mart tables update

then the added data should come to the reports when i generate reports isn’t it? Please let me know whether there is anything that Im missing here. thanks


Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 3:39 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi Awanthika,

I also find that if you have a google account and signed in, clearing your cache sometimes doesn’t work. Try signing out, clear both browser and application cache and try again. If that fails, use another computer and see if it’s the same problems you are getting. If yes, check your data integrity to see if you could spot anything there that may be causing the problem.

Best wishes,

Busoye

On 6 Nov 2013, at 14:01, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have attempted everything. with no luck. even the organizational unit I created last as hospital C does not appear in the reporting view to get a report as an organization unit. to be more precise i have attached two scrreen shots of the data entry view and the report i generated.

Can someone please help me to get the data values i entered into the reports?

Thanks.

Regards
Awanthika

<Screenshot from 2013-11-06 14:53:50.png><Screenshot from 2013-11-06 14:54:20.png>_______________________________________________

Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 11:02 AM, Knut Staring knutst@gmail.com wrote:

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards
Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi
Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University
Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431
fax: +265 (01) 776 410

skype: kabango.malewezi
www.jhpiego.org<http://www.jhpiego.org/>
www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM
To: Knut Staring
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks
Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks
regards


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp


Knut Staring
Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

If you want to start fresh, just do a metadata export of your hierarchy and import them to an empty Dhis instance.

  1. nov. 2013 12:54 skrev “awanth sen” wnthksnrth@gmail.com følgende:
···

On Wed, Nov 6, 2013 at 5:21 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Sorry I meant the other way round. Make sure Data element Value Type is number and not Text.

On 6 Nov 2013, at 15:43, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi,

One other reason why you might not see your data in the report is if the data element Value Type is number and not text.

Best.

Busoye
On 6 Nov 2013, at 15:19, awanth sen wnthksnrth@gmail.com wrote:

Hi,

I have tried that too. now i can see all the organizational units i created. is there anything that Im not doing right here?

You have to add data elements, assign them to data sets and then assign the data set to the organizational unit.

Go to the data entry pane and add data and click on complete button. that is all i did and then ran the analytical data mart with both options ticked
analytical tables update and data mart tables update

then the added data should come to the reports when i generate reports isn’t it? Please let me know whether there is anything that Im missing here. thanks


Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 3:39 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi Awanthika,

I also find that if you have a google account and signed in, clearing your cache sometimes doesn’t work. Try signing out, clear both browser and application cache and try again. If that fails, use another computer and see if it’s the same problems you are getting. If yes, check your data integrity to see if you could spot anything there that may be causing the problem.

Best wishes,

Busoye

On 6 Nov 2013, at 14:01, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have attempted everything. with no luck. even the organizational unit I created last as hospital C does not appear in the reporting view to get a report as an organization unit. to be more precise i have attached two scrreen shots of the data entry view and the report i generated.

Can someone please help me to get the data values i entered into the reports?

Thanks.

Regards
Awanthika

<Screenshot from 2013-11-06 14:53:50.png><Screenshot from 2013-11-06 14:54:20.png>_______________________________________________

Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 11:02 AM, Knut Staring knutst@gmail.com wrote:

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards
Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi
Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University
Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431
fax: +265 (01) 776 410

skype: kabango.malewezi
www.jhpiego.org<http://www.jhpiego.org/>
www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM
To: Knut Staring
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks
Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks
regards


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp


Knut Staring
Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

Ok, thanks a lot

Awanthika

···

On Wed, Nov 6, 2013 at 6:21 PM, Knut Staring knutst@gmail.com wrote:

If you want to start fresh, just do a metadata export of your hierarchy and import them to an empty Dhis instance.

  1. nov. 2013 12:54 skrev “awanth sen” wnthksnrth@gmail.com følgende:

Yes i checked that, the data type value is indeed number. I had this in another machine before and this process worked fine for me. I must be missing some step in the process. is there anyway that i can delete all elements i created and start afresh? since i have data entry objects the system wont allow me to delete the data elements either.

thanks
awanthika


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 5:21 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Sorry I meant the other way round. Make sure Data element Value Type is number and not Text.

On 6 Nov 2013, at 15:43, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi,

One other reason why you might not see your data in the report is if the data element Value Type is number and not text.

Best.

Busoye
On 6 Nov 2013, at 15:19, awanth sen wnthksnrth@gmail.com wrote:

Hi,

I have tried that too. now i can see all the organizational units i created. is there anything that Im not doing right here?

You have to add data elements, assign them to data sets and then assign the data set to the organizational unit.

Go to the data entry pane and add data and click on complete button. that is all i did and then ran the analytical data mart with both options ticked
analytical tables update and data mart tables update

then the added data should come to the reports when i generate reports isn’t it? Please let me know whether there is anything that Im missing here. thanks


Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 3:39 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi Awanthika,

I also find that if you have a google account and signed in, clearing your cache sometimes doesn’t work. Try signing out, clear both browser and application cache and try again. If that fails, use another computer and see if it’s the same problems you are getting. If yes, check your data integrity to see if you could spot anything there that may be causing the problem.

Best wishes,

Busoye

On 6 Nov 2013, at 14:01, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have attempted everything. with no luck. even the organizational unit I created last as hospital C does not appear in the reporting view to get a report as an organization unit. to be more precise i have attached two scrreen shots of the data entry view and the report i generated.

Can someone please help me to get the data values i entered into the reports?

Thanks.

Regards
Awanthika

<Screenshot from 2013-11-06 14:53:50.png><Screenshot from 2013-11-06 14:54:20.png>_______________________________________________

Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 11:02 AM, Knut Staring knutst@gmail.com wrote:

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards
Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi
Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University
Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431
fax: +265 (01) 776 410

skype: kabango.malewezi
www.jhpiego.org<http://www.jhpiego.org/>
www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM
To: Knut Staring
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks
Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks
regards


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp


Knut Staring
Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

Hi all,

Thanks it worked after metadata export. al the data appears successfully now.

Thanks

regards

···

On Wed, Nov 6, 2013 at 6:21 PM, Knut Staring knutst@gmail.com wrote:

If you want to start fresh, just do a metadata export of your hierarchy and import them to an empty Dhis instance.

  1. nov. 2013 12:54 skrev “awanth sen” wnthksnrth@gmail.com følgende:

Yes i checked that, the data type value is indeed number. I had this in another machine before and this process worked fine for me. I must be missing some step in the process. is there anyway that i can delete all elements i created and start afresh? since i have data entry objects the system wont allow me to delete the data elements either.

thanks
awanthika


Mailing list: https://launchpad.net/~dhis2-users

Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users

More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 5:21 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Sorry I meant the other way round. Make sure Data element Value Type is number and not Text.

On 6 Nov 2013, at 15:43, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi,

One other reason why you might not see your data in the report is if the data element Value Type is number and not text.

Best.

Busoye
On 6 Nov 2013, at 15:19, awanth sen wnthksnrth@gmail.com wrote:

Hi,

I have tried that too. now i can see all the organizational units i created. is there anything that Im not doing right here?

You have to add data elements, assign them to data sets and then assign the data set to the organizational unit.

Go to the data entry pane and add data and click on complete button. that is all i did and then ran the analytical data mart with both options ticked
analytical tables update and data mart tables update

then the added data should come to the reports when i generate reports isn’t it? Please let me know whether there is anything that Im missing here. thanks


Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 3:39 PM, Adebusoye Anifalaje busoye@hisp.org wrote:

Hi Awanthika,

I also find that if you have a google account and signed in, clearing your cache sometimes doesn’t work. Try signing out, clear both browser and application cache and try again. If that fails, use another computer and see if it’s the same problems you are getting. If yes, check your data integrity to see if you could spot anything there that may be causing the problem.

Best wishes,

Busoye

On 6 Nov 2013, at 14:01, awanth sen wnthksnrth@gmail.com wrote:

Hi all,

I have attempted everything. with no luck. even the organizational unit I created last as hospital C does not appear in the reporting view to get a report as an organization unit. to be more precise i have attached two scrreen shots of the data entry view and the report i generated.

Can someone please help me to get the data values i entered into the reports?

Thanks.

Regards
Awanthika

<Screenshot from 2013-11-06 14:53:50.png><Screenshot from 2013-11-06 14:54:20.png>_______________________________________________

Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 11:02 AM, Knut Staring knutst@gmail.com wrote:

Try Kabango’s suggestion first. Actually, it is what everyone always should try first in pretty much all cases where you face a problem with DHIS2. It is also what I should have recommended first.

Good luck!

Knut


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

On Wed, Nov 6, 2013 at 6:30 AM, awanth sen wnthksnrth@gmail.com wrote:

thanks all,

I will try these steps.

My issue is i have created data elements, and organization units. the generated data sets and assigned them to organizational units.

on the data entry tab i added some data to my data sets and then completed. when i navigate to the already a\entered data entries eg: 2012 Jan HIV patient count it shows the entered data by m e.

But when i try to generate report to the particular organization unit the data sets i assigned comes correctly with the value column empty.

I have also run the analytical data mart. but the data is not appearing in the report

thanks

regards
Awanthika


Knut Staring

Dept. of Informatics, University of Oslo

+4791880522

http://dhis2.org

On Wed, Nov 6, 2013 at 10:54 AM, Kabango Malewezi Kabango.Malewezi@jhpiego.org wrote:

Happened to me several times. Clearing the web browser cache does the trick.

With Regards
Jhpiego—Innovating to Save Lives

Name: Kabango Malewezi
Title: ICT4D/Database Manager

Jhpiego—an affiliate of Johns Hopkins University
Address: 2nd Floor, Pamodzi House, City Center, P.O Box 1091, Lilongwe, Malawi

tel: +265 (01) 776 412/3/4 | Mobile: +265 (0) 88 4 245 431
fax: +265 (01) 776 410

skype: kabango.malewezi
www.jhpiego.org<http://www.jhpiego.org/>
www.facebook.com/Jhpiego<http://www.facebook.com/Jhpiego>


From: Dhis2-users [dhis2-users-bounces+kmalewezi=jhpiego.net@lists.launchpad.net] on behalf of awanth sen [wnthksnrth@gmail.com]

Sent: Wednesday, November 06, 2013 7:18 AM
To: Knut Staring
Cc: dhis2-users@lists.launchpad.net
Subject: Re: [Dhis2-users] [Dhis2-devs] Data saving issue in report generation

is it bug in the version? do I have to drop the database itself and redeploy? or replacing the war file int he webapps is enough?

thanks
Awanthika

On Wed, Nov 6, 2013 at 10:40 AM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Maybe try 2.13. Also check your log.

  1. nov. 2013 01:37 skrev “awanth sen” <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> følgende:

Hi Knut,

Im using 2.12 version. I did not try the demo version. I had a previous installation in another machine which worked fine.

Thanks

On Tue, Nov 5, 2013 at 3:57 PM, Knut Staring <knutst@gmail.commailto:knutst@gmail.com> wrote:

Do you see the same behaviour in the online demo?

What version/build of DHIS2 are you using?

Knut

On Tue, Nov 5, 2013 at 11:26 AM, awanth sen <wnthksnrth@gmail.commailto:wnthksnrth@gmail.com> wrote:

Hi all,

I have set up dhis and generated data sets using a data element. I can enter data using data entry tab, and once entered they are saved. I can viewed the saved data in the data entry tab as well.

Bu when i generate reports for the particular hospital, the data sets i have assigned for the hospital are shown correctly but not the values. the value column is empty…

I have also run the analytical data mart.

could someone help me in solving this?

thanks
regards


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


Mailing list: https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>

Post to : dhis2-devs@lists.launchpad.netmailto:dhis2-devs@lists.launchpad.net

Unsubscribe : https://launchpad.net/~dhis2-devs<https://launchpad.net/%7Edhis2-devs>
More help : https://help.launchpad.net/ListHelp


Knut Staring
Dept. of Informatics, University of Oslo

+4791880522tel:%2B4791880522
http://dhis2.org


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate
Department of Electronics and Telecommunication Engineering
University of Moratuwa


------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH
Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa