Hi all,
So I have a DHIS2 deploy that i am just setting up with tables and charts.
When I create data set and enter data, no matter what I do, the data does not show on the analysis tools for data, period and org unit selection.
Interestingly, when I attach a category combination with the data set and select the combo in addition to data, period, org unit, i get data. Though the data seems incorrect. Still looking into that.
I have run Analytics export severally, waited 24 hours, cleared application and browser caches, checked on a new browser, etc. still no data. I am using DHIS 2.29 and I have checked on Chrome, Safari and Firefox.
I tried same set up on DHIS 2.28 that I had and it worked at once.
Does anyone have ideas on this pls? Is this an issue with DHIS 2.29 or is there something I need to check??
Thanks
···
Regards,
Leke Seweje
Are you using the same database with 2.29 as with 2.28? Did you run the SQL upgrade script?
Knut
···
On Fri, May 18, 2018 at 6:43 PM, Olaleke Seweje sewejeolaleke@gmail.com wrote:
Hi all,
So I have a DHIS2 deploy that i am just setting up with tables and charts.
When I create data set and enter data, no matter what I do, the data does not show on the analysis tools for data, period and org unit selection.
Interestingly, when I attach a category combination with the data set and select the combo in addition to data, period, org unit, i get data. Though the data seems incorrect. Still looking into that.
I have run Analytics export severally, waited 24 hours, cleared application and browser caches, checked on a new browser, etc. still no data. I am using DHIS 2.29 and I have checked on Chrome, Safari and Firefox.
I tried same set up on DHIS 2.28 that I had and it worked at once.
Does anyone have ideas on this pls? Is this an issue with DHIS 2.29 or is there something I need to check??
Thanks
–
Regards,
Leke Seweje
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp
–
Knut Staring
Department of Information, Evidence and Research
World Health Organization, Geneva, Switzerland
Office: +41 22 791 3683 Mob1: +33 6 4434 2931 Mob2: +47 9188 0522
Skype: knutstar
Not the same database, 2.29 is a fresh install and the two are on different servers.
···
On Fri, May 18, 2018 at 5:45 PM, Knut Staring knutst@gmail.com wrote:
Are you using the same database with 2.29 as with 2.28? Did you run the SQL upgrade script?
Knut
–
On Fri, May 18, 2018 at 6:43 PM, Olaleke Seweje sewejeolaleke@gmail.com wrote:
Hi all,
So I have a DHIS2 deploy that i am just setting up with tables and charts.
When I create data set and enter data, no matter what I do, the data does not show on the analysis tools for data, period and org unit selection.
Interestingly, when I attach a category combination with the data set and select the combo in addition to data, period, org unit, i get data. Though the data seems incorrect. Still looking into that.
I have run Analytics export severally, waited 24 hours, cleared application and browser caches, checked on a new browser, etc. still no data. I am using DHIS 2.29 and I have checked on Chrome, Safari and Firefox.
I tried same set up on DHIS 2.28 that I had and it worked at once.
Does anyone have ideas on this pls? Is this an issue with DHIS 2.29 or is there something I need to check??
Thanks
–
Regards,
Leke Seweje
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp
Knut Staring
Department of Information, Evidence and Research
World Health Organization, Geneva, Switzerland
Office: +41 22 791 3683 Mob1: +33 6 4434 2931 Mob2: +47 9188 0522
Skype: knutstar
–
Regards,
Leke Seweje
@Stephen, yes, I could see my data in data entry screen all perfectly.
···
On Fri, May 18, 2018 at 6:15 PM, Stephen Ocaya socaya@hispuganda.org wrote:
Hi, do you see your data from data entry screen? If so, kindly update the resource tables and run analytics separately.
The other thing to check is on user management, do you an orgunit set for analysis for your account??
Even if U are an admin, you might need to update the user account to attach data
2.29 also now has a very complex sharing settings that you might need to look at on the dataset, data elements etc. Confirm that you have view data right on the dataset and related objects.
Then check again.
On Fri, May 18, 2018, 20:05 Olaleke Seweje sewejeolaleke@gmail.com wrote:
Not the same database, 2.29 is a fresh install and the two are on different servers.
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp
Strategic Information Systems for Actions
Plot 36 Impala Avenue, Kololo
P.O. Box 4750, Kampala
–
On Fri, May 18, 2018 at 5:45 PM, Knut Staring knutst@gmail.com wrote:
Are you using the same database with 2.29 as with 2.28? Did you run the SQL upgrade script?
Knut
–
Regards,
Leke Seweje
On Fri, May 18, 2018 at 6:43 PM, Olaleke Seweje sewejeolaleke@gmail.com wrote:
Hi all,
So I have a DHIS2 deploy that i am just setting up with tables and charts.
When I create data set and enter data, no matter what I do, the data does not show on the analysis tools for data, period and org unit selection.
Interestingly, when I attach a category combination with the data set and select the combo in addition to data, period, org unit, i get data. Though the data seems incorrect. Still looking into that.
I have run Analytics export severally, waited 24 hours, cleared application and browser caches, checked on a new browser, etc. still no data. I am using DHIS 2.29 and I have checked on Chrome, Safari and Firefox.
I tried same set up on DHIS 2.28 that I had and it worked at once.
Does anyone have ideas on this pls? Is this an issue with DHIS 2.29 or is there something I need to check??
Thanks
–
Regards,
Leke Seweje
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp
Knut Staring
Department of Information, Evidence and Research
World Health Organization, Geneva, Switzerland
Office: +41 22 791 3683 Mob1: +33 6 4434 2931 Mob2: +47 9188 0522
Skype: knutstar
–
Regards,
Leke Seweje
I’m running into this as well…
on tracker capture I can see that I have "Total: 5" against the list.. but I cannot see any of them, if I look at data statistics it tells me that I have entities enrolled in programs.
I’ve granted superuser role with everything assigned…
Any advice?
Thanks
bret
···
On 19/05/18 20:10, Olaleke Seweje wrote:
@Stephen, yes, I could see my data in data entry screen all perfectly.
I tried everyone's suggestions, thank you all for offering help.
In the long since I installed on my personal VPS, I basically switched to another DB and started over. I am getting better results now.
I guess I must have done something wrong earlier.
Thanks all.
On Fri, May 18, 2018 at 6:15 PM, Stephen Ocaya <socaya@hispuganda.org>
wrote:
Hi, do you see your data from data entry screen? If so, kindly update the resource tables and run analytics separately.
The other thing to check is on user management, do you an orgunit set for analysis for your account??
Even if U are an admin, you might need to update the user account to attach data
2.29 also now has a very complex sharing settings that you might need to look at on the dataset, data elements etc. Confirm that you have view data right on the dataset and related objects.
Then check again.
On Fri, May 18, 2018, 20:05 Olaleke Seweje <sewejeolaleke@gmail.com > wrote:
Not the same database, 2.29 is a fresh install and the two are on different servers.
On Fri, May 18, 2018 at 5:45 PM, Knut Staring <knutst@gmail.com>
wrote:
Are you using the same database with 2.29 as with 2.28? Did you run the SQL upgrade script?
Knut
On Fri, May 18, 2018 at 6:43 PM, Olaleke Seweje <sewejeolaleke@gmail.com>
wrote:
Hi all,
So I have a DHIS2 deploy that i am just setting up with tables and charts.
When I create data set and enter data, no matter what I do, the data does not show on the analysis tools for data, period and org unit selection.
Interestingly, when I attach a category combination with the data set and select the combo in addition to data, period, org unit, i get data. Though the data seems incorrect. Still looking into that.
I have run Analytics export severally, waited 24 hours, cleared application and browser caches, checked on a new browser, etc. still no data. I am using DHIS 2.29 and I have checked on Chrome, Safari and Firefox.
I tried same set up on DHIS 2.28 that I had and it worked at once.
Does anyone have ideas on this pls? Is this an issue with DHIS 2.29 or is there something I need to check??
Thanks
–
Regards,
Leke Seweje
Mailing list: [https://launchpad.net/~dhis2-users](https://launchpad.net/%7Edhis2-users)
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : [https://launchpad.net/~dhis2-users](https://launchpad.net/%7Edhis2-users)
More help : [https://help.launchpad.net/ListHelp](https://help.launchpad.net/ListHelp)
Knut Staring
Department of Information, Evidence and Research
World Health Organization, Geneva, Switzerland
Office: +41 22 791 3683 Mob1: +33 6 4434 2931 Mob2: +47 9188 0522
Skype: knutstar
–
–
Regards,
Leke Seweje
Mailing list: [https://launchpad.net/~dhis2-users](https://launchpad.net/%7Edhis2-users)
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : [https://launchpad.net/~dhis2-users](https://launchpad.net/%7Edhis2-users)
More help : [https://help.launchpad.net/ListHelp](https://help.launchpad.net/ListHelp)
Strategic Information Systems for Actions
Plot 36 Impala Avenue, Kololo
P.O. Box 4750, Kampala
–
Regards,
Leke Seweje
_______________________________________________ Mailing list: Post to : Unsubscribe : More help :
https://launchpad.net/~dhis2-usersdhis2-users@lists.launchpad.nethttps://launchpad.net/~dhis2-usershttps://help.launchpad.net/ListHelp